Emerald Dshackle

Emerald Dshackle is a Fault Tolerant Load Balancer for Blockchain API.

The goal of the Emerald Dshackle is to provide a stable routing to multiple nodes, and ensure that each request is executed on an appropriate provider. It considers nodes locations, state, current height, RPC methods it can provide and other characteristics.

It tries to recover from connection errors, faulty nodes, invalid responses, etc. If upstream lags behind others, lost peers below required, started to resync or went down, then Dshackle temporarily excludes it from requests and returns it when the upstream problem is fixed.

The upstreams may be blockchain nodes such as Bitcoind, Geth, Parity, or public providers like Infura, QuickNode, etc. It automatically verifies their availability and the current status of the network, executes commands making sure that the response is consistent and/or data successfully broadcast to the network.

Provides:

• Standard Bitcoin and Ethereum JSON RPC API over HTTP and WebSocket

• Enhanced gRPC-based API, with upstream selection, async execution, etc

• Secure TLS with optional client authentication

• Blockchain-aware edge caching, in memory and Redis

• Routing based on data availability (peers, height, sync status)

• Data consistency, it always gives a most actual state

• Automatic failover and retry

• Separate public blockchain nodes from your internal servers

Blockchains support:

• Ethereum and Ethereum Classic

• Kovan, Goerli, Ropsten, Rinkeby testnets

• Bitcoin

• Bitcoin testnet

Warning

The project is still under development, please use with caution.

Quick Start

Configuration

Create file dshackle.yaml with the following content:

version: v1
port: 2449
tls:
  enabled: false

proxy:
  host: 0.0.0.0
  port: 8545
  routes:
    - id: eth
      blockchain: ethereum
    - id: kovan
      blockchain: kovan
    - id: btc
      blockchain: bitcoin

cluster:
  upstreams:
    - id: infura-eth
      chain: ethereum
      connection:
        ethereum:
          rpc:
            url: "https://mainnet.infura.io/v3/${INFURA_USER}"
          ws:
            url: "wss://mainnet.infura.io/ws/v3/${INFURA_USER}"
    - id: infura-kovan
      chain: kovan
      connection:
        ethereum:
          rpc:
            url: "https://kovan.infura.io/v3/${INFURA_USER}"
          ws:
            url: "wss://kovan.infura.io/ws/v3/${INFURA_USER}"
    - id: bitcoin-main
      chain: bitcoin
      connection:
        bitcoin:
          rpc:
            url: "http://localhost:8332"
            basic-auth:
              username: bitcoin
              password: mypassword

Which sets the following:

• gRPC access through 0.0.0.0:2449

  • TLS security is disabled (please don’t use in production!)

• JSON RPC access through 0.0.0.0:8545 (both HTTP and WebsScket)

  • proxy requests to Ethereum and Kovan upstreams

  • request path for Ethereum Mainnet is /eth, /kovan for Kovan Testnet, and /btc for bitcoin

  • i.e. call Ethereum Mainnet by POST http://127.0.0.0:8545/eth with JSON RPC payload

• two upstreams, one for Ethereum Mainnet and another for Kovan Testnet (both upstreams are configured to use Infura endpoint)

• for Ethereum Mainnet it connects using JSON RPC and WebSocket connections,

• for Bitcoin Mainet only JSON RPC is used

• ${INFURA_USER} will be provided through environment variable

Please note that you can configure many upstreams for a single blockchains. If there is more than one upstream, then Dshackle routes requests to them as Round Robin. If one of them becomes unavailable, Dshackle continues to use only active nodes.

I.e., you can set up a node in the local network, plus Infura with role: fallback. If anything happened to your local node, you still have access to a consistent state of the Ethereum blockchain via Infura.

See full documentations.

Run docker image

Official Docker image you can find at: emeraldpay/dshackle

Setup Infura username

export INFURA_USER=...

Run Dshackle

docker run -p 2449:2449 -p 8545:8545 -v $(pwd):/etc/dshackle -e "INFURA_USER=$INFURA_USER" emeraldpay/dshackle:0.12

Now it listens on port 2449 at the localhost and can be connected from any gRPC compatible client. Tools such as gRPCurl can automatically parse protobuf definitions and connect to it (actual Protobuf sources are located in a separate repository which you can find at https://github.com/emeraldpay/proto)

Alternatively you can connect to port 8545 with traditional JSON RPC requests

Access using JSON RPC over HTTP

Dshackle implements standard JSON RPC interface, providing additional caching layer, upstream readiness/liveness checks, retry and other features for building Fault Tolerant services.

Request using Curl

curl --request POST \
  --url http://localhost:8545/eth \
  --header 'content-type: application/json' \
  --data '{"jsonrpc":"2.0", "method":"eth_getBalance", "id":1, "params":["0x690b2bdf41f33f9f251ae0459e5898b856ed96be", "latest"]}'

Output

{"jsonrpc":"2.0","id":1,"result":"0x72fa5e0181"}

Access using JSON RPC over WebSocket

Or the same Proxy URL can be accessed through WebSocket

websocat ws://localhost:8545/eth

Then make RPC calls or subscriptions:

> | {"jsonrpc":"2.0", "id": 1, "method": "eth_subscribe", "params": ["newHeads"]}

< | {"jsonrpc":"2.0","id":1,"result":"1f8"}
< | {"jsonrpc":"2.0","method":"eth_subscription","params":{"result":{....},"subscription":"1f8"}}

Access using gRPC

Note	It’s not necessary to use gRPC, as Dshackle can provide standard JSON RPC proxy, but Dshackle gRPC interface improves performance and provides additional features.

Dshackle provides a custom gRPC based API, which provides additional methods and other features such as streaming responses. Please refer to the documentation: gRPC Methods The Protobuf definitions could be found in ./proto.

Connect and listen for new blocks on Ethereum Mainnet

grpcurl -import-path ./proto/ -proto blockchain.proto -d '{\"type\": 100}' -plaintext 127.0.0.1:2449 emerald.Blockchain/SubscribeHead

type: 100 specifies the blockchain id, and 100 means Ethereum Mainnet. 1 is for Bitcoin Mainnet. There we use Ethereum because it creates new blocks every 14 seconds, which works better for demo purposes, but the same request applied to Bitcoin as well.

Output would be like

{
  "chain": "CHAIN_ETHEREUM",
  "height": 8396159,
  "blockId": "fc58a258adccc94466ae967b1178eea721349b0667f59d5fe1b0b436460bce75",
  "timestamp": 1566423564000,
  "weight": "AnMcf2VJB5kOSQ=="
}
{
  "chain": "CHAIN_ETHEREUM",
  "height": 8396160,
  "blockId": "787899711b862b77df8d2faa69de664048598265a9f96abf178d341076e200e0",
  "timestamp": 1566423574000,
  "weight": "AnMch35tO6hSGg=="
}
...
...

The output above is for a streaming subscription to all new blocks on the Ethereum Mainnet.

It’s one of the services provided by Dshackle, in addition to standard methods provided by RPC JSON of underlying nodes.

You can also subscribe to balances changes of the balance on an address:

grpcurl -import-path ./proto/ -proto blockchain.proto -d '{\"asset\": {\"chain\": \"100\", \"code\": \"ether\"}, \"address\": {\"address_single\": {\"address\": \"0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2\"}}}' -plaintext 127.0.0.1:2449 emerald.Blockchain/SubscribeBalance

and see how balance of the contract responsible for Wrapped Ether is changing:

{
  "asset": {
    "chain": "CHAIN_ETHEREUM",
    "code": "ETHER"
  },
  "address": {
    "address": "0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2"
  },
  "balance": "2410941696896999943701015"
}
{
  "asset": {
    "chain": "CHAIN_ETHEREUM",
    "code": "ETHER"
  },
  "address": {
    "address": "0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2"
  },
  "balance": "2410930748488073834320430"
}
...

The balance subscription works with main coin (ether, bitcoin), or with tokens like ERC-20 if configured additionally. See Configuration Reference.

See other enhanced methods in the Documentation for Enhanced Methods.

Documentation

For detailed documentation see docs/ directory.

Client Libraries

JSON RPC

Dshackle should be compatible with all standard libraries that use Ethereum JSON RPC over HTTP.

Java gRPC Client

https://github.com/emeraldpay/emerald-java-client

repositories {
    maven { url  "https://maven.emrld.io" }
}

dependencies {
    implementation 'io.emeraldpay:emerald-api:0.9.2'
}

Javascript gRPC Client

https://github.com/emeraldpay/emerald-js-grpc

"dependencies": {
    "@emeraldpay/api-node": "0.2.0-beta.1",
}

See more in the documentation for Client Libraries.

Development

Warning

The code in master branch is considered a development version, which may lack proper testing and should not be used in production.

Setting up environment

Dshackle is JVM based project written in Kotlin. To build and run it from sources you’ll need to install Java JDK and Gradle

Build Dshackle

Build everything

gradle build

Make a Zip distribution

gradle distZip

You can find a redistributable zip in build/distributions

Make a Docker distribution

gradle jib -Pdocker=gcr.io/myproject

Gradle will prepare a Docker image and upload it to your custom Docker Registry at gcr.io/myproject (please change to address of your actual registry)

Architecture

Dshackle is built using:

• Kotlin

• Spring Framework + Spring Boot

• Spring Reactor

• Netty

• Etherjar

• gRPC and HTTP2 protocol

• Groovy and Spock for testing

Community

Development Chat

Commercial Support

Want to support the project, prioritize a specific feature, or get commercial help with using Dshackle in your project? Please contact splix@emerald.cash to discuss the possibility

License

Copyright 2021 EmeraldPay, Inc

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.