SVIn2 is a tightly coupled Sonar-Visual-Inertial-Depth formulation of Simultaneous Localization and Mapping (SLAM) algorithm for real-time Underwater navigation. The package contains two modules:

1. okvis_ros: Adaption of OKVIS (https://github.com/ethz-asl/okvis_ros) to fuse Sonar and Depth information in the tightly coupled formulation.
2. pose_graph: Loop-closing module to enable real-time loop detection and pose-graph optimization based on the bag-of-binary-words library DBoW2.

How do I get set up?

This is a catkin package that wraps the pure CMake project. You will need to install the following dependencies,

• CMake,

    sudo apt install cmake
  

• ROS (currently tested in: melodic and noetic). Read the instructions to install ROS Noetic. You will need the additional package pcl-ros and tf2-sensor-msgs.

    sudo apt install ros-noetic-pcl-ros
    sudo apt install ros-noetic-tf2-sensor-msgs
  

• google-glog + gflags, BLAS & LAPACK, Eigen3

    sudo apt install libgoogle-glog-dev libatlas-base-dev libeigen3-dev
  

• SuiteSparse, CXSparse, OpenCV and Boost

    sudo apt install libsuitesparse-dev libopencv-dev
    sudo apt install libboost-dev libboost-filesystem-dev
  

• ceres-solver

    git clone https://github.com/ceres-solver/ceres-solver.git
    cd ceres-solver
    git checkout 1.14.x
    mkdir build
    cd build
    cmake -DCMAKE_BUILD_TYPE=Release ..
    make -j8
    sudo make install
    cd ../..
  

• brisk

    wget https://www.doc.ic.ac.uk/~sleutene/software/brisk-2.0.8.zip
    unzip brisk-2.0.8.zip
    cd brisk
    mkdir build
    cd build
    cmake -DCMAKE_BUILD_TYPE=Release ..
    make -j8
    sudo make install
    cd ../..
  

Building the project

• Create ros workspace. Download SVIn and sonar driver. Then build catkin project:

    mkdir -p ~/svin_ws/src
    cd ~/svin_ws/src
    git clone --branch 0.2 https://github.com/AutonomousFieldRoboticsLab/SVIn.git
    git clone https://github.com/AutonomousFieldRoboticsLab/imagenex831l.git
    
    # For Ubuntu 18.04/20.04 (ROS Noetic)
    git clone --branch ros-noetic git@github.com:AutonomousFieldRoboticsLab/sonar_rviz_plugin.git
    
    #For Ubuntu 16.04
    git clone git@github.com:AutonomousFieldRoboticsLab/sonar_rviz_plugin.git
    
    cd ..
    catkin_make
  

Running the project

Running it on our publicly available datasets: https://afrl.cse.sc.edu/afrl/resources/datasets/. If you follow "Datasets for Visual-Inertial-Based State Estimation Algorithms" link you will be directed to a google drive directory, under the 'Bus' and 'Cave' you will find ROS bagfile with Sonar topic named as '/imagenex831l/range' and '/imagenex831l/range_raw'.

Run the launch file for Cave:

    source ~/svin_ws/devel/setup.bash
    roslaunch okvis_ros svin_stereorig_v2.launch

Or, run the launch file for Bus:

    source ~/svin_ws/devel/setup.bash
    roslaunch okvis_ros svin_stereorig_v1.launch

In different terminal, run the bag file

    rosbag play bagfile_name --clock -r 0.8

Ground Truth

The pseudo ground truth trajectories obtained using COLMAP are in colmap_groundtruth folder. These trajectories are only accurate up to scale and evaluation should be done after scaling only.

Note: We plan to release the scale accurate trajectory using rig constraints soon.