enabled setInsecure() for ESP32

[ubidefeo]

Previously a call to this method had to be omitted, it was only required for ESP8266.
Out of a debugging session ended up with the broker refusing connections so I enabled insecure mode and it now works

[github-actions]

Memory usage change @ 69441ba

Board	flash	%	RAM for global variables	%
arduino:mbed:envie_m4	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed:envie_m7	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkr1000	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrgsm1400	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrnb1500	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwan1300	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwifi1010	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:nano_33_iot	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
esp32:esp32:esp32	🔺 +44 - +44	0.0 - 0.0	0 - 0	0.0 - 0.0
esp8266:esp8266:huzzah	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0

Click for full report table

Board	examples/ArduinoIoTCloud-Advanced flash	%	examples/ArduinoIoTCloud-Advanced RAM for global variables	%	examples/ArduinoIoTCloud-Basic flash	%	examples/ArduinoIoTCloud-Basic RAM for global variables	%	examples/utility/ArduinoIoTCloud_Travis_CI flash	%	examples/utility/ArduinoIoTCloud_Travis_CI RAM for global variables	%	examples/utility/Provisioning flash	%	examples/utility/Provisioning RAM for global variables	%	examples/utility/SelfProvisioning flash	%	examples/utility/SelfProvisioning RAM for global variables	%
arduino:mbed:envie_m4	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed:envie_m7	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkr1000	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrgsm1400	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrnb1500	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwan1300	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwifi1010	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:nano_33_iot	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
esp32:esp32:esp32	44	0.0	0	0.0	44	0.0	0	0.0	44	0.0	0	0.0
esp8266:esp8266:huzzah	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0

Click for full report CSV

Board,examples/ArduinoIoTCloud-Advanced<br>flash,%,examples/ArduinoIoTCloud-Advanced<br>RAM for global variables,%,examples/ArduinoIoTCloud-Basic<br>flash,%,examples/ArduinoIoTCloud-Basic<br>RAM for global variables,%,examples/utility/ArduinoIoTCloud_Travis_CI<br>flash,%,examples/utility/ArduinoIoTCloud_Travis_CI<br>RAM for global variables,%,examples/utility/Provisioning<br>flash,%,examples/utility/Provisioning<br>RAM for global variables,%,examples/utility/SelfProvisioning<br>flash,%,examples/utility/SelfProvisioning<br>RAM for global variables,%
arduino:mbed:envie_m4,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed:envie_m7,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkr1000,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrgsm1400,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrnb1500,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwan1300,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,,,,
arduino:samd:mkrwifi1010,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:nano_33_iot,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
esp32:esp32:esp32,44,0.0,0,0.0,44,0.0,0,0.0,44,0.0,0,0.0,,,,,,,,
esp8266:esp8266:huzzah,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,,,,,,,,

[aentinger]

The change looks reasonable for me, however I do not have any ESP32 hardware available to verify this change.

[aentinger]

On a second thought its perfectly reasonable. If there is no secure element attached to the ESP32 then there's no other option available but to go the setInsecure (insecure) way. Please be advised @ubidefeo that using this method leads to a non-secure connection, as outlined in 6d0d5ed.

[ubidefeo]

@aentinger
sorry, didn't have time to get back to your last comment.
Previously using setInsecure() would fail compilation, that is why I only enabled it for ESP8266 in my first patch.
Now it's the other way around.
Thank you for merging :)