Maple is a series of Arduino like boards created by LeafLabs (http://www.leaflabs.com/). LeafLabs provided a version of the Arduino IDE tailored for Maple https://github.com/leaflabs/maple-ide but it is no longer supported, and uses an old version of the Arduino IDE.
maple-asp provides support for Maple compatible boards for use with the "new" Arduino IDE 1.5.x, without requiring any modifications to the Arduino IDE. The bulk of maple-asp is the libmaple code https://github.com/leaflabs/libmaple, in the form of an Arduino add on package.
Currently the following boards are supported:
- Maple Rev 3+
Pre-requisites:
- Arduino IDE version 1.5.7 or later
Installation procedure:
- Copy the Arduino/hardware/ folder to your sketchbook folder (e.g. ~/Arduino)
- Restart Arduino IDE
Note: maple-asp is designed to be installed into your sketchbook, not the Arduino program folder, otherwise it will not work properly.
- Implement all the board/memory variants
- create wrapper utility for DFU download
- support for linux
- build and test examples
maple-asp is an Open Source project.
libmaple is mostly licensed with MIT license.
Other files are licensed as GPL or BSD.
Please see individual files for Copyright notices.
- LeafLabs (maple-ide, libmaple)
- Bob Cousins