This repository has been archived by the owner on Dec 9, 2018. It is now read-only.
-
Notifications
You must be signed in to change notification settings - Fork 1.8k
Command Line Options
Lu Wang edited this page May 29, 2014
·
3 revisions
This is the manual page of version 0.12. Please run man pdf2htmlEX for the latest manual.
Please file an issue if you find this page outdated.
pdf2htmlEX(1) General Commands Manual pdf2htmlEX(1)
NAME
pdf2htmlEX - converts PDF to HTML without losing text and format.
USAGE
pdf2htmlEX [options] <input-filename> [<output-filename>]
DESCRIPTION
pdf2htmlEX is a utility that converts PDF files to HTML files.
pdf2htmlEX tries its best to render the PDF precisely, maintain proper
styling, while retaining text and optimizing for Web.
Fonts are extracted form PDF and then embedded into HTML (Type 3 fonts
are not supported). Text in the converted HTML file is usually
selectable and copyable.
Other objects are rendered as images and also embedded.
OPTIONS
Pages
-f, --first-page <num> (Default: 1)
Specify the first page to process
-l, --last-page <num> (Default: last page)
Specify the last page to process
Dimensions
--zoom <ratio>, --fit-width <width>, --fit-height <height>
--zoom specifies the zoom factor directly; --fit-width/height
specifies the maximum width/height of a page, the values are in
pixels.
If multiple values are specified, the minimum one will be used.
If none is specified, pages will be rendered as 72DPI.
--use-cropbox <0|1> (Default: 1)
Use CropBox instead of MediaBox for output.
--hdpi <dpi>, --vdpi <dpi> (Default: 144)
Specify the horizontal and vertical DPI for images
Output
--embed <string>
--embed-css <0|1> (Default: 1)
--embed-font <0|1> (Default: 1)
--embed-image <0|1> (Default: 1)
--embed-javascript <0|1> (Default: 1)
--embed-outline <0|1> (Default: 1)
Specify which elements should be embedded into the output HTML
file.
If switched off, separated files will be generated along with
the HTML file for the corresponding elements.
--embed accepts a string as argument. Each letter of the string
must be one of `cCfFiIjJoO`, which corresponds to one of the
--embed-*** switches. Lower case letters for 0 and upper case
letters for 1. For example, `--embed cFIJo` means to embed
everything but CSS files and outlines.
--split-pages <0|1> (Default: 0)
If turned on, the content of each page is stored in a separated
file.
This switch is useful if you want pages to be loaded separately
& dynamically -- a supporting server might be necessary.
Also see --page-filename.
--dest-dir <dir> (Default: .)
Specify destination folder.
--css-filename <filename> (Default: <none>)
Specify the filename of the generated css file, if not embedded.
If it's empty, the file name will be determined automatically.
--page-filename <filename> (Default: <none>)
Specify the filename template for pages when --split-pages is 1
A %d placeholder may be included in `filename` to indicate where
the page number should be placed. The placeholder supports a
limited subset of normal numerical placeholders, including spec‐
ified width and zero padding.
If `filename` does not contain a placeholder for the page num‐
ber, the page number will be inserted directly before the file
extension. If the filename does not have an extension, the page
number will be placed at the end of the file name.
If --page-filename is not specified, <input-filename> will be
used for the output filename, replacing the extension with .page
and adding the page number directly before the extension.
Examples
pdf2htmlEX --split-pages 1 foo.pdf
Yields page files foo1.page, foo2.page, etc.
pdf2htmlEX --split-pages 1 foo.pdf --page-filename bar.baz
Yields page files bar1.baz, bar2.baz, etc.
pdf2htmlEX --split-pages 1 foo.pdf --page-filename page%dbar.baz
Yields page files page1bar.baz, page2bar.baz, etc.
pdf2htmlEX --split-pages 1 foo.pdf --page-filename bar%03d.baz
Yields page files bar001.baz, bar002.baz, etc.
--outline-filename <filename> (Default: <none>)
Specify the filename of the generated outline file, if not
embedded.
If it's empty, the file name will be determined automatically.
--process-nontext <0|1> (Default: 1)
Whether to process non-text objects (as images)
--process-outline <0|1> (Default: 1)
Whether to show outline in the generated HTML
--printing <0|1> (Default: 1)
Enable printing support. Disabling this option may reduce the
size of CSS.
--fallback <0|1> (Default: 0)
Output in fallback mode, for better accuracy and browser compat‐
ibility, but the size becomes larger.
--tmp-file-size-limit <limit> (Default: -1)
This limits the total size (in KB) of the temporary files which
will also limit the total size of the output file. This is an
estimate and it will stop after a page, once the total temporary
files size is greater than this number.
-1 means no limit and is the default.
Fonts
--embed-external-font <0|1> (Default: 1)
Specify whether the local matched fonts, for fonts not embedded
in PDF, should be embedded into HTML.
If this switch is off, only font names are exported such that
web browsers may try to find proper fonts themselves, and that
might cause issues about incorrect font metrics.
--font-format <format> (Default: woff)
Specify the format of fonts extracted from the PDF file.
--decompose-ligature <0|1> (Default: 0)
Decompose ligatures. For example 'fi' -> 'f''i'.
--auto-hint <0|1> (Default: 0)
If set to 1, hints will be generated for the fonts using font‐
forge.
This may be preceded by --external-hint-tool.
--external-hint-tool <tool> (Default: <none>)
If specified, the tool will be called in order to enhanced hint‐
ing for fonts, this will precede --auto-hint.
The tool will be called as '<tool> <in.suffix> <out.suffix>',
where suffix will be the same as specified for --font-format.
--stretch-narrow-glyph <0|1> (Default: 0)
If set to 1, glyphs narrower than described in PDF will be
stretched; otherwise space will be padded to the right of the
glyphs
--squeeze-wide-glyph <0|1> (Default: 1)
If set to 1, glyphs wider than described in PDF will be
squeezed; otherwise it will be truncated.
--override-fstype <0|1> (Default: 0)
Clear the fstype bits in TTF/OTF fonts.
Turn this on if Internet Explorer complains about 'Permission
must be Installable' AND you have permission to do so.
--process-type3 <0|1> (Default: 0)
If turned on, pdf2htmlEX will try to convert Type 3 fonts such
that text can be rendered natively in HTML. Otherwise all text
with Type 3 fonts will be rendered as image.
This feature is highly experimental.
Text
--heps <len>, --veps <len> (Default: 1)
Specify the maximum tolerable horizontal/vertical offset (in
pixels).
pdf2htmlEX would try to optimize the generated HTML file moving
Text within this distance.
--space-threshold <ratio> (Default: 0.125)
pdf2htmlEX would insert a whitespace character ' ' if the dis‐
tance between two consecutive letters in the same line is wider
than ratio * font_size.
--font-size-multiplier <ratio> (Default: 4.0)
Many web browsers limit the minimum font size, and many would
round the given font size, which results in incorrect rendering.
Specify a ratio greater than 1 would resolve this issue, however
it might freeze some browsers.
For some versions of Firefox, however, there will be a problem
when the font size is too large, in which case a smaller value
should be specified here.
--space-as-offset <0|1> (Default: 0)
If set to 1, space characters will be treated as offsets, which
allows a better optimization.
For PDF files with bad encodings, turning on this option may
cause losing characters.
--tounicode <-1|0|1> (Default: 0)
A ToUnicode map may be provided for each font in PDF which indi‐
cates the 'meaning' of the characters. However often there is
better "ToUnicode" info in Type 0/1 fonts, and sometimes the
ToUnicode map provided is wrong. If this value is set to 1, the
ToUnicode Map is always applied, if provided in PDF, and charac‐
ters may not render correctly in HTML if there are collisions.
If set to -1, a customized map is used such that rendering will
be correct in HTML (visually the same), but you may not get cor‐
rect characters by select & copy & paste.
If set to 0, pdf2htmlEX would try its best to balance the two
methods above.
--optimize-text <0|1> (Default: 0)
If set to 1, pdf2htmlEX will try to reduce the number of HTML
elements used for text. Turn it off if anything goes wrong.
Background Image
--bg-format <format> (Default: png)
Specify the background image format. Run `pdf2htmlEX -v` to
check all supported formats.
PDF Protection
-o, --owner-password <password>
Specify owner password
-u, --user-password <password>
Specify user password
--no-drm <0|1> (Default: 0)
Override document DRM settings
Turn this on only when you have permission.
Misc.
--clean-tmp <0|1> (Default: 1)
If switched off, intermediate files won't be cleaned in the end.
--data-dir <dir> (Default: /usr/local/share/pdf2htmlEX)
Specify the folder holding the manifest and other files (see
below for the manifest file)`
--tmp-dir <dir> (Default: /tmp)
Specify the temporary folder to use for temporary files
--css-draw <0|1> (Default: 0)
Experimental and unsupported CSS drawing
--debug <0|1> (Default: 0)
Print debug information.
Meta
-v, --version
Print copyright and version info
--help Print usage information
MANIFEST and DATA-DIR
When split-pages is 0, the manifest file describes how the final html
page should be generated.
By default, pdf2htmlEX will use the manifest in the default data-dir
(run `pdf2htmlEX -v` to check), which gives a simple demo of its syn‐
tax.
You can modify the default one, or you can create a new one and specify
the correct data-dir in the command line.
All files referred by the manifest must be located in the data-dir.
EXAMPLE
pdf2htmlEX /path/to/file.pdf
Convert file.pdf into file.html
pdf2htmlEX --clean-tmp 0 --debug 1 /path/to/file.pdf
Convert file.pdf and leave all intermediate files.
pdf2htmlEX --dest-dir out --embed fi /path/to/file.pdf
Convert file.pdf into out/file.html and leave font/image files
separated.
COPYRIGHT
Copyright 2012,2013 Lu Wang <coolwanglu@gmail.com>
pdf2htmlEX is licensed under GPLv3 with additional terms, read LICENSE
for details.
AUTHOR
pdf2htmlEX is written by Lu Wang <coolwanglu@gmail.com>
SEE ALSO
Home page
https://github.com/coolwanglu/pdf2htmlEX
pdf2htmlEX Wiki
https://github.com/coolwanglu/pdf2htmlEX/wiki
pdf2htmlEX 0.12 pdf2htmlEX(1)