Skip to content

CRSF_FRAMETYPE_ELRS_STATUS

Jump to bottom
Bryan Mayland edited this page Dec 19, 2023 · 1 revision

ExpressLRS Status (0x2E)

!! Non-Standard ExpressLRS Hacks !!

  • uint8_t packetsBad - Bad packet (failed CRC) count in the past second
  • uint16_t packetsGood - Good packet (passed CRC) count in the past second
  • uint8_t flags - Higher values have higher priority
    • 0x00 - No flags
    • 0x01 - Connected
    • 0x04 - Model Mismatch
    • 0x08 - Armed
    • 0x20 - Not while connected (not used)
    • 0x40 - Baud rate too low (not used)
  • string message - Display message

This message is sent my ExpressLRS transmitter modules in response to CRSF_FRAMETYPE_PARAMETER_WRITE of parameter 0x00. This is used to populate the bad/good packet counter at the top of the Lua, along with allowing sending warning (flash title bar) or error (popup message) messages.

Clone this wiki locally