Assistant Relay is a Node.js server. It's exposed with SSDP, and runs an Express Web Server that allows for commands to be sent to the Google Assistant.
It also supports the Google Home Broadcast command, so unlike other TTS solutions that cast audio, Assistant Relay allows you to send audio notifications to your Google Home devices, without interrupting music.
Download a copy of this repository and then use npm install to get started
Assistant Relay requires you to download an OAuth2 JSON file from Google. To do this, please follow this guide: https://developers.google.com/assistant/sdk/guides/service/python/embed/config-dev-project-and-account Note: When creating an Oauth Client ID, make sure you use the "Other" application type
Once you have downloaded your client secret file, copy it to the root folder of this project.
Open your command prompt in the Assistant Relay directory, and run:
npm run build-config
This will allow you to add your chosen name and associated client secret into the config file, as well as define the port the relay server runs on. You can add multiple users, however ensure that each user has correctly configured their Google account so that it is linked with your Google Home devices.
Now that the Assistant Relay is configured, start the relay with the command npm run start
This should open a web browser asking you to # to your Google account. Make sure you use the account linked to you Google Home/Assistant.
Once signed in, a code will be presented to you. Copy this code into the terminal, and press enter. Your Google Home should now notify you that the Assistant Relay is setup.
Note: If your web browser does not open, follow the instructions in the terminal This process will continue for each user you added to the config file.
At the moment, it is only possible to issue a command to all Google Home devices. Additional support for Home Groups will be coming in the future. For all of the below commands, it is possible to override the account that issues the command by adding the user parameter to the request, and matching it against the name you set it in the config file.
If you want your Google Home to speak the response, make sure you pass a new parameter called "converse" as true.
To send a Broadcast command, simply send a HTTP Post request:
http://<ip_address>:<port>/customBroadcast
with the following parameters:
text: hello world
user: <user in config>
The full request would be:
http://<ip_address>:<port>/customBroadcast?text=hello+world&user=>user in config>
The Google Home device will now play an audio alert, and say Hello World
The Google Home also has a number of preconfigured broadcasts that have some fancy additions to them such as sound effects. These can be found here:
Rather than configure these elsewhere, they are built into the Assistant Relay. Simple send a request as follows:
http://<ip_address>:<port>/broadcast?preset=<command>&user=<config file user name>
Available Commands
- wakeup
- breakfast
- lunch
- dinner
- timetoleave
- arrivedhome
- ontheway
- movietime
- tvtime
- bedtime
Note: Some of these preconfigured commands also say who triggered the command, such as the 'on the way' command. Since Assistant Relay only currently supports one user, this will automatically use the account for whoever setup Assistant Relay with their account
If you want to start a stream from your Nest Cam to a Chromecast device, you can do this with the following request:
http://<ip_address>:<port>/nestStream?camera=<camera name>&chromecast=<chromecast_name>&user=<config file user name>
To stop a stream, send the following request:
http://<ip_address>:<port>/nestStream?stop=true&chromecast=<chromecast_name>
Note: The user must have the Chromecast device in their account, and have the Nest camera assigned to their account
If you want to send a custom command to the Google Home (anything that would follow 'OK Google'), use the following request:
http://<ip_address>:<port>/custom?command=<custom command>&user=<config file user name>
This project uses the google-assistant repository from endoplasmic https://github.com/endoplasmic/google-assistant
Whilst donations are appreciated, they are not expected, nor required. If you want to buy me a drink, you can do so here: https://monzo.me/greghesp
Assistant Relay is a Node.js server. It's exposed with SSDP, and runs an Express Web Server that allows for commands to be sent to the Google Assistant.
It also supports the Google Home Broadcast command, so unlike other TTS solutions that cast audio, Assistant Relay allows you to send audio notifications to your Google Home devices, without interrupting music.
Download a copy of this repository and then use npm install to get started
Assistant Relay requires you to download an OAuth2 JSON file from Google. To do this, please follow this guide: https://developers.google.com/assistant/sdk/guides/service/python/embed/config-dev-project-and-account Note: When creating an Oauth Client ID, make sure you use the "Other" application type
Once you have downloaded your client secret file, copy it to the root folder of this project.
Open your command prompt in the Assistant Relay directory, and run:
npm run build-config
This will allow you to add your chosen name and associated client secret into the config file, as well as define the port the relay server runs on. You can add multiple users, however ensure that each user has correctly configured their Google account so that it is linked with your Google Home devices.
Now that the Assistant Relay is configured, start the relay with the command npm run start
This should open a web browser asking you to # to your Google account. Make sure you use the account linked to you Google Home/Assistant.
Once signed in, a code will be presented to you. Copy this code into the terminal, and press enter. Your Google Home should now notify you that the Assistant Relay is setup.
Note: If your web browser does not open, follow the instructions in the terminal This process will continue for each user you added to the config file.
At the moment, it is only possible to issue a command to all Google Home devices. Additional support for Home Groups will be coming in the future. For all of the below commands, it is possible to override the account that issues the command by adding the user parameter to the request, and matching it against the name you set it in the config file.
If you want your Google Home to speak the response, make sure you pass a new parameter called "converse" as true.
To send a Broadcast command, simply send a HTTP Post request:
http://<ip_address>:<port>/customBroadcast
with the following parameters:
text: hello world
user: <user in config>
The full request would be:
http://<ip_address>:<port>/customBroadcast?text=hello+world&user=>user in config>
The Google Home device will now play an audio alert, and say Hello World
The Google Home also has a number of preconfigured broadcasts that have some fancy additions to them such as sound effects. These can be found here:
Rather than configure these elsewhere, they are built into the Assistant Relay. Simple send a request as follows:
http://<ip_address>:<port>/broadcast?preset=<command>&user=<config file user name>
Available Commands
- wakeup
- breakfast
- lunch
- dinner
- timetoleave
- arrivedhome
- ontheway
- movietime
- tvtime
- bedtime
Note: Some of these preconfigured commands also say who triggered the command, such as the 'on the way' command. Since Assistant Relay only currently supports one user, this will automatically use the account for whoever setup Assistant Relay with their account
If you want to start a stream from your Nest Cam to a Chromecast device, you can do this with the following request:
http://<ip_address>:<port>/nestStream?camera=<camera name>&chromecast=<chromecast_name>&user=<config file user name>
To stop a stream, send the following request:
http://<ip_address>:<port>/nestStream?stop=true&chromecast=<chromecast_name>
Note: The user must have the Chromecast device in their account, and have the Nest camera assigned to their account
If you want to send a custom command to the Google Home (anything that would follow 'OK Google'), use the following request:
http://<ip_address>:<port>/custom?command=<custom command>&user=<config file user name>
This will only log out the response into console, so if you send "What time is it?" as the command, the response would be in the console only. To have your Google Home speak the answer, simple pass the converse parameter as true:
http://<ip_address>:<port>/custom?command=<custom command>&user=<config file user name>&converse=true
This project uses the google-assistant repository from endoplasmic https://github.com/endoplasmic/google-assistant
Whilst donations are appreciated, they are not expected, nor required. If you want to buy me a drink, you can do so here: https://monzo.me/greghesp