Skip to content
/ tlse Public

Single C file TLS 1.2/1.3 implementation, using tomcrypt as crypto library

License

Notifications You must be signed in to change notification settings

eduardsui/tlse

Repository files navigation

TLSe

Single C file TLS 1.3, 1.2, 1.1 and 1.0(without the weak ciphers) implementation, using libtomcrypt as crypto library. It also supports DTLS 1.2 and 1.0. Before using tlse.c you may want to download and compile tomcrypt; alternatively you may use libtomcrypt.c (see Compiling).

As secondary features, it supports SRTP key exchange, encryption and decryption, DTLS-SRTP and WebRTC RTCPeerConnection without any dependencies (it can stream audio/video from your C server to a browser via WebRTC).

Note: It does not implement 0-RTT. Client-side TLS 1.3 support is experimental.

Like this project ? You may donate Bitcoin for this project at 14LqvMzFfaJ82C7wY5iavvTf9HPELYWsax

Compiling

Manually


Simple TLS client: $ gcc tlshello.c -o tlshello -ltomcrypt -ltommath -DLTM_DESC

For debuging tls connections, the DEBUG flag must be set (-DDEBUG).

Simple TLS server: $ gcc tlsserverhello.c -o tlsserverhello -ltomcrypt -ltommath -DLTM_DESC

The entire library is a single c file that you just include in your source.

The library may also use the libtomcrypt.c amalgamation. In this case, the client may be compiled:

$ gcc tlshello.c -o tlshello -DTLS_AMALGAMATION

and the server:

$ gcc tlsserverhello.c -o tlsserverhello -DTLS_AMALGAMATION

tlse.h is optional (is safe to just include tlse.c). Alternatively, you may include tlse.h and add tlse.c to your makefile (useful when linking against C++).

If thread-safety is needed, you need to call tls_init() before letting any other threads in, and not use the same object from multiple threads without a mutex. Other than that, TLSe and libtomcrypt are thread-safe. Also, you may want to define LTC_PTHREAD if you're using libtomcrypt.

TLSe supports KTLS on linux kernel 4.13 or higher. KTLS is a TLS implementation in the linux kernel. If TLS_RX is not defined, KTLS is send-only (you may use send/sendfile to send data, but you may not use recv). Also, the negotiation must be handled by TLSe. If KTLS support is needed, define WITH_KTLS (compile with -DWITH_KTLS). Note that is not clear which header should be included for linux structure, you may need to check these structures and constants: https://github.com/torvalds/linux/blob/master/Documentation/networking/tls.txt.

With cmake


$ mkdir build && cd build && cmake ../ -DTLSE_COMPILE_DEFINITIONS="TLS_AMALGAMATION" -DBUILD_EXAMPLES=ON && cmake --build . --verbose

TLSE_COMPILE_DEFINITIONS may be given with a filler as semicolon-reparated values enclosed into double-quoted string

Usage


You just #include "tlse.c" in your code. Everything is a single file.

Features


The main feature of this implementation is the ability to serialize TLS context, via tls_export_context and re-import it, via tls_import_context in another pre-forked worker process (socket descriptor may be sent via sendmsg).

For now it supports TLS 1.2, TLS 1.1 + 1.0 (when TLS_LEGACY_SUPPORT is defined / default is on), RSA, ECDSA, DHE, ECDHE ciphers: TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA256, TLS_DHE_RSA_WITH_AES_256_CBC_SHA256, TLS_DHE_RSA_WITH_AES_128_GCM_SHA256, TLS_DHE_RSA_WITH_AES_256_GCM_SHA384, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256, TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384, TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256` and `TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384.

The following ciphers are supported but disabled by default: TLS_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_128_CBC_SHA256, TLS_RSA_WITH_AES_256_CBC_SHA256, TLS_RSA_WITH_AES_128_GCM_SHA256, TLS_RSA_WITH_AES_256_GCM_SHA384. To enable these ciphers, TLSe must be compiled with -DNO_TLS_ROBOT_MITIGATION. ROBOT attack is mitigated by default, but it is recommended to disable RSA encryption to avoid future vulnerabilities.

TLSe now supports ChaCha20/Poly1305 ciphers: TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256, TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 and TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256. These ciphers are enabled by default.

It has a low level interface, efficient for non-blocking, asynchronous sockets, and a blocking, libssl-style interface.

It implements all that is needed for the TLS protocol version 1.2 and a pem/der parser. From tomcrypt it uses RSA, ECDSA and AES(GCM and CBC) encryption/decryption, SHA1, SHA256, SHA384, SHA512 and HMAC functions.

Now it supports client certificate. To request a client certificate, call tls_request_client_certificate(TLSContext *) following tls_accept(TLSContext *).

It implements SNI extension (Server Name Indication). To get the SNI string call tls_sni(TLSContext *). It also implements SCSV and ALPN (see tls_add_alpn(struct TLSContext *, const char *) and const char *tls_alpn(struct TLSContext *).

The library supports certificate validation by using tls_certificate_chain_is_valid, tls_certificate_chain_is_valid_root, tls_certificate_valid_subject and tls_certificate_is_valid(checks not before/not after). Note that certificates fed to tls_certificate_chain_is_valid must be in correct order (certificate 2 signs certificate 1, certificate 3 signs certificate 2 and so on; also certificate 1 (first) is the certificate to be used in key exchange).

This library was written to be used by my other projects Concept Applications Server and Concept Native Client

Examples


  1. examples/tlsclienthello.c simple client example
  2. examples/tlshelloworld.c simple server example
  3. examples/tlssimple.c simple blocking client using libssl-ish API
  4. examples/tlssimpleserver.c simple blocking server using libssl-ish API

After compiling the examples, in the working directory, you should put fullchain.pem and privkey.pem in a directory called testcert for running the server examples. I've used letsencrypt for certificate generation (is free!).

Important security note


Note that for DTLS, it doesn't implement a state machine, so using this DTLS implementation with UDP (server) may expose your server to DoS attack.

License


Public domain, BSD, MIT. Choose one.

About

Single C file TLS 1.2/1.3 implementation, using tomcrypt as crypto library

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages