Error in configuring ESP8266 RTOS SDK development environment on Linux？？？ (GIT8266O-851)

[UFO281]

when I run this command

wls@ubuntu:~/esp/ESP8266_RTOS_SDK/examples/get-started/hello_world$ make all

Encountered this error：

Building partitions from /home/wls/esp/ESP8266_RTOS_SDK/components/partition_table/partitions_singleapp.csv...
WARNING: Missing submodule components/json/cJSON...
Attempting 'git submodule update --init components/json/cJSON' in esp-idf root directory...
Submodule 'components/json/cJSON' (git@github.com:DaveGamble/cJSON.git) registered for path 'components/json/cJSON'
Cloning into '/home/wls/esp/ESP8266_RTOS_SDK/components/json/cJSON'...
Submodule path 'components/json/cJSON': checked out '3c8935676a97c7c97bf006db8312875b4f292f6c'
WARNING: Missing submodule components/lwip/lwip...
Attempting 'git submodule update --init components/lwip/lwip' in esp-idf root directory...
Submodule 'components/lwip/lwip' (git@github.com:espressif/esp-lwip.git) registered for path 'components/lwip/lwip'
Cloning into '/home/wls/esp/ESP8266_RTOS_SDK/components/lwip/lwip'...

Submodule path 'components/lwip/lwip': checked out '4fd84abace0cd8a5a709c194fa54afb3cd39b3f7'
WARNING: Missing submodule components/mbedtls/mbedtls...
Attempting 'git submodule update --init components/mbedtls/mbedtls' in esp-idf root directory...
Submodule 'components/mbedtls/mbedtls' (git@github.com:espressif/mbedtls.git) registered for path 'components/mbedtls/mbedtls'
Cloning into '/home/wls/esp/ESP8266_RTOS_SDK/components/mbedtls/mbedtls'...

[UFO281]

who can help me ????? please!!

[UFO281]

The development environment of Lexin's ESP8266 is too complex!

[karnigen]

For me, everything works fine for version 3.4 as it should. Just use make menuconfig and make flash, and it works right away. Maybe for ESP8266, it's not as well-documented as for ESP32, so if needed, look for inspiration there.

It seems that the RTOS for ESP8266 was not installed as described.

• Check if you really cloned the git with the recursive switch.
• Check if version v3.4 was checked out from the git.
• Check if you ran install.sh.
• Check if the compilers are stored in $HOME/.espressif and if a virtual Python environment has been created.
• Activate Python for ESP8266 RTOS from $HOME/.espressif and run export.sh.
• It's absolutely crucial for the environment to be correctly set up to avoid being overwritten by running any IDE, and to have the correct virtual Python environment active.

[0smr]

@UFO281 As far as I can see, there are no errors in your logs.

[UFO281]

@UFO281 As far as I can see, there are no errors in your logs.

But he can't work properly

[UFO281]

no, had error is compile error

…

________________________________ 发件人: SMR ***@***.***> 发送时间: 2024年4月9日 8:45 收件人: espressif/ESP8266_RTOS_SDK ***@***.***> 抄送: wls ***@***.***>; Mention ***@***.***> 主题: Re: [espressif/ESP8266_RTOS_SDK] Error in configuring ESP8266 RTOS SDK development environment on Linux？？？ (GIT8266O-851) (Issue #1274) @UFO281<https://github.com/UFO281> As far as I can see, there are no errors in your logs. ― Reply to this email directly, view it on GitHub<#1274 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AQPORQEVY5FT3AENEGTWIXLY4M22HAVCNFSM6AAAAABF2P42XCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANBTHE2DCMBRGU>. You are receiving this because you were mentioned.

[XiaoXianNv-boot]

子模块未初始化,请检查网络