Skip to content

Security: fwdIT/theforeman.org

Security

security.md

layout title
security
Security

Security process

We take security issues seriously and welcome responsible disclosure from researchers discovering vulnerabilities in Foreman. Please email foreman-security@googlegroups.com (a private address for the security team) with all reports.

We will endeavour to resolve high severity issues in the current stable release and lower severity issues in the next major release. Announcements of security issues will be made on foreman-announce when a release containing a fix is available to end users and credit will be given to the researcher if desired.

The policy of the project is to treat all newly reported issues as private, and after evaluation, low to medium severity issues will be made public while high severity issues will be fixed under an embargo. Typically the project supports only one major (x.y) release at a time, though high severity issues may also be fixed in the previous release if it was only recently superseded.

Security advisories

All security advisories made for Foreman are listed below with their corresponding CVE identifier.

Disclosure details

CVE-2016-3693: application information leakage through templates

A provisioning template containing inspect will expose sensitive information about the Rails controller and application when rendered when using Safemode rendering (the default setting). This includes the application secret token, possibly permitting a privilege escalation.

Thanks to Ivan Necas for reporting the issue.

As a precaution, the security token may be regenerated with:

  1. chown foreman /usr/share/foreman/config/initializers/local_secret_token.rb
  2. foreman-rake security:generate_token
  3. chown root /usr/share/foreman/config/initializers/local_secret_token.rb

Mitigation: remove edit_provisioning_templates from untrusted users.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.11.1
  • Redmine issue #14635

Ruby code execution via Discovery settings

It is possible to run arbitrary Ruby code entering it on the Administer - Settings - Discovery and then visiting a discovered host detail page where it gets rendered.

  • Affects Foreman Discovery 4.2.0 to 5.0.1 (gem releases only, rc and nightly builds)
  • Discovery plugin 4.1 series (shipped with Foreman 1.10) was not affected.
  • Fixed in Discovery plugin 5.0.2
  • Redmine issue #14140

CVE-2016-2100: private bookmarks can be viewed and edited

Bookmarks set to 'private' can be viewed by any user, and edited or deleted by any user granted the edit or destroy_bookmarks permissions.

Mitigation: remove edit_bookmarks and destroy_bookmarks from untrusted users, remove private information from bookmark searches.

  • Affects Foreman 0.3 and higher
  • Fix released in Foreman 1.11.0-RC2 and 1.10.3
  • Redmine issue #13828

CVE-2015-7518: parameter information popup allows stored XSS

The popup boxes next to global parameters, smart class parameters and smart variables on the host and host group edit forms can allow stored XSS to be executed in the browser from the parameter description etc.

Mitigation: do not click on the information popup box next to parameters in the host/group forms, and/or remove permission to edit Puppet classes from untrusted users.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.10.0
  • Redmine issue #12611

SQL injection via facts search terms

The search for facts and also hosts by facts is vulnerable to SQL injection by breaking out of quotes in either the fact name or the fact value.

No CVE identifier will be assigned to this vulnerability as it affects only release candidates.

  • Affects Foreman 1.10.0-RC1 and higher
  • Fix released in Foreman 1.10.0-RC3
  • Redmine issue #12458

CVE-2015-5282: parameter hide checkbox allows stored XSS during change

The parameter management UI has a checkbox to mark values as hidden to mask them from casual viewing. The checkbox that hides/shows the value fails to handle HTML properly and so is vulnerable to an XSS issue where HTML can be stored in a parameter, and executed by another user if they later tick/untick the hide box.

  • Affects Foreman 1.7.0 and higher
  • Fix released in Foreman 1.10.0-RC1
  • Redmine issue #11859

CVE-2015-5246: Active Directory login works with old password after change

This CVE identifier was assigned before realizing that this was not a bug in Foreman, but a feature of Active Directory. It will remain assigned for future reference only. See the Active Directory password changes section of the manual or Microsoft KB906305 for more details.

When using an Active Directory instance to log into Foreman (via an LDAP authentication source), it is possible to log into Foreman for up to one hour after a password change in AD using the old password.

  • Fix to Foreman not required, reconfigure Active Directory
  • Redmine issue #11471

CVE-2015-5233: reports show/destroy not restricted by host authorization

Users with view_reports or destroy_reports permissions allows a user to view or delete reports from any host without taking their view_hosts permission into account.

The reports list and other views combine the reports and hosts permissions to only show reports for hosts that a user can view, but the individual report show/delete pages and APIs do not apply the hosts permissions.

Mitigation: remove view_reports and destroy_reports permissions from users until a fix is available, or add a search query to the role filter to restrict it.

  • Affects Foreman 1.5.0 and higher
  • Fix released in Foreman 1.9.1 and 1.8.4
  • Redmine issue #11579

CVE-2015-5152: require_ssl does not enforce HTTPS on API

The "require_ssl" setting in /etc/foreman/settings.yml should enforce that web requests sent to Foreman over HTTP are redirected to HTTPS, but this was found not to happen with API requests (e.g. from Hammer CLI). Foreman will process API requests over HTTP, but should have redirected.

Redirection won't help with credentials having already been sent, but should give some notification that the user/app is using the wrong URL.

Mitigation: add the following to the Apache HTTP VirtualHost, e.g. in /etc/httpd/conf.d/05-foreman.d/api_request.conf:

RewriteEngine On
RewriteRule ^/api/(.*) https://%{SERVER_NAME}/api/$1 [R,L]
  • Affects Foreman 1.1 and higher
  • Fix released in Foreman 1.9.0-RC1
  • Redmine issue #11119

CVE-2015-3235: edit_users permission allows changing of admin passwords

A user with the edit_users permission (e.g. with the Manager role) is allowed to edit admin users. This allows them to change the password of the admin user's account and gain access to it.

Mitigation: change roles of users with the edit_users permission, remove the Unlimited flag and set a search query of admin = false.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.9.0-RC1
  • Redmine issue #10829

CVE-2015-3199: Discovery: auto provision rule not enforcing org/locations

This CVE identifier was assigned before realizing that no released versions of Foreman Discovery were affected. It will remain assigned for future reference only.

The Foreman Discovery plugin auto provisioning rules do not enforce that the rule and the assigned host group are in the same organization and location. This can allow a rule to be configured with mismatched orgs/locations, and for another user who has access to the rule but not the host group, to run it and provision a host into a group in a different org/location to their own.

  • Affects no released versions of Foreman Discovery
  • Fix released in Foreman Discovery 4.0.0
  • Redmine issue #10469

CVE-2015-3155: session cookie set without secure flag on HTTPS

The session cookie created when accessing the Foreman web UI over HTTPS is not set with the 'secure' flag, which may lead to session hijacking.

If a user successfully logs into Foreman, then accesses Foreman over HTTP (which redirects to HTTPS, but with a window of opportunity), the session ID will be sent unencrypted and the session may be hijacked by an attacker.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.8.1
  • Redmine issue #10275

CVE-2015-1844: users are not restricted to organizations/locations

When a non-admin user is associated to organizations or locations, their access is not correctly restricted. API access allows access to resources in any org/location, and UI access when the user is associated to more than one org/location is not restricted.

This allows users to read, edit and perform actions on resources (e.g. hosts) outside of the organizations or locations they have been assigned to.

  • Affects Foreman 1.2.0 (TBC) and higher
  • Fix released in Foreman 1.8.0-RC3 and 1.7.5
  • Redmine issue #9947

CVE-2015-1816: SSL certificate not verified on LDAP connections

When making an SSL connection to an LDAP authentication source in Foreman, the remote server certificate is accepted without any verification against known certificate authorities.

This can allow the LDAP connection between Foreman and the LDAP server to be attacked, and a different LDAP server could be contacted to authenticate users to Foreman.

  • Affects Foreman 1.3.0 and higher
  • Fix released in Foreman 1.7.4 and 1.8.0-RC2
  • Redmine issue #9858

CVE-2014-3691: SSL certificate verification bypass in smart proxy

The smart proxy (foreman-proxy) fails to block connections when no client SSL certificate is supplied, instead permitting any request. Typically the smart proxy is configured to receive HTTPS requests with a client SSL certificate that is signed by the same CA (certificate authority) as its own, preventing unauthorized access to manage services such as DHCP, DNS and the Puppet CA.

It is strongly recommended to mitigate the problem by restricting access to the smart proxy. More information on foreman-announce.

Thanks to Michael Moll, Jon McKenzie and Michael Messmore for reporting the issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.6.2 and 1.5.4
  • Redmine issue #7822
  • Red Hat Bugzilla #1150879

CVE-2014-3653: stored cross site scripting (XSS) in template previews

Provisioning templates can store HTML and then evaluate HTML or JS content when using the editor's preview function.

Thanks to Aaron Stone for reporting this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.6.1
  • Redmine issue #7483
  • Red Hat Bugzilla #1145398

CVE-2014-3590: user logout vulnerable to CSRF

The user logout function could be triggered through cross-site request forgery (e.g. a redirect), causing a user to be logged out and lose their active session.

Thanks to Jan Hutař of Red Hat for discovering this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.6.1
  • Redmine issue #6999
  • Red Hat Bugzilla #1128108

CVE-2014-3531: stored cross site scripting (XSS) in operating system names

Operating system names and descriptions could store and cause evaluation of HTML in page views, allowing a cross site scripting (XSS) attack against the user.

Thanks to Jan Hutař of Red Hat for discovering this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.5.2
  • Redmine issue #6580
  • Red Hat Bugzilla #1108745

CVE-2014-3492: stored cross site scripting (XSS) in YAML preview

The host YAML page, used to preview the Foreman response for the Puppet ENC, will evaluate HTML stored in any host data such as parameters or comments, allowing a cross site scripting (XSS) attack against the user.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.4.5 and 1.5.1
  • Redmine issue #6149
  • Red Hat Bugzilla #1108241

CVE-2014-3491: stored cross site scripting (XSS) in notification dialogs

When resources (e.g. a host group) were saved or deleted through the web UI, the name of the resource would be evaluated unsafely inside the notification popup, allowing a cross site scripting (XSS) attack against the user changing the resource.

Thanks to Adam Salah of the Red Hat Satellite 6 QE Team for discovering this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.4.5 and 1.5.1
  • Redmine issue #5881
  • Red Hat Bugzilla #1100313

CVE-2014-0007: TFTP boot file fetch API permits remote code execution

The Smart Proxy API for downloading boot files from installation media to the TFTP server was vulnerable to remote code execution exploits.

Thanks to Lukas Zapletal of the Red Hat Foreman Team for discovering this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.4.5 and 1.5.1
  • Redmine issue #6086
  • Red Hat Bugzilla #1105369

CVE-2014-0208: stored cross site scripting (XSS) in search auto-completion

The search auto-completion was vulnerable to a stored cross site scripting (XSS) attack via completion of (global/host) parameters in search keys.

Thanks to Jan Hutař of Red Hat for discovering this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.4.4 and 1.5.0
  • Redmine issue #5471
  • Red Hat Bugzilla #1094642

CVE-2014-0192: provisioning template previews are world-readable

Provisioning templates previews ("spoof") are accessible without authentication when used with the hostname parameter.

  • Affects Foreman 1.4.0 to 1.4.3 inclusive
  • Fix released in Foreman 1.4.4 and 1.5.0
  • Redmine issue #5436
  • Red Hat Bugzilla #1092354

CVE-2014-0135: Kafo leaves world-readable default_values.yaml file

When Kafo (used in the Foreman installer) runs, a /tmp/default_values.yaml file is written to and created with world readable permissions. This is prone to race-condition attacks and contains default values for all parameters, such as autogenerated passwords.

  • Affects all known Kafo versions
  • Fix released in Kafo 0.3.17 and 0.5.2 (to Foreman 1.4 and 1.5 repos respectively)
  • Redmine issue #4648
  • Red Hat Bugzilla #1076335

CVE-2014-0090: session fixation, new session IDs are not generated on login

Upon successful login, a new session ID was not generated for the user, so an attacker who had set the session ID in the request from the user's browser would be able to exploit the escalated session with the user's privileges.

Thanks to Jeremy Choi and Keqin Hong of the Red Hat HSS Pen-Test Team for discovering this issue.

  • Affects all known Foreman versions
  • Fix released in Foreman 1.4.2
  • Redmine issue #4457
  • Red Hat Bugzilla #1072151

CVE-2014-0089: stored cross site scripting (XSS) on 500 error page

The 500 error page was vulnerable to stored cross site scripting attacks, where the error message was rendered without HTML encoding. In addition, bookmarks could be saved by any user with HTML in the name which caused an error when rendering the bookmark list, leading to a 500 error and execution of the HTML in the browser.

Thanks to Jeremy Choi and Keqin Hong of the Red Hat HSS Pen-Test Team for discovering this issue.

  • Affects Foreman 1.4.0 to 1.4.1 inclusive
  • Fix released in Foreman 1.4.2
  • Redmine issue #4456
  • Red Hat Bugzilla #1071741

CVE-2013-4386: SQL injection in host/host group parameter overrides

Host and host group parameter overrides (lookup_values) allowed SQL injection from the host FQDN or host group label.

  • Fix released in Foreman 1.2.3
  • Redmine issue #3160
  • Red Hat Bugzilla #1013076

CVE-2013-4182: hosts API privilege escalation

The /api/hosts API was found to provide access to all hosts without checking whether the current user has privileges to view a particular host.

Thanks to Daniel Lobato Garcia of CERN IT-PES-PS for discovering this issue.

  • Fix released in Foreman 1.2.2
  • Redmine issue #2863
  • Red Hat Bugzilla #990374

CVE-2013-4180: DoS via hosts controller input conversion

Power and IPMI boot actions converted user input to symbols, which could lead to memory exhaustion.

Thanks to Marek Hulan of the Red Hat Foreman Team for discovering this issue.

  • Fix released in Foreman 1.2.2
  • Redmine issue #2860
  • Red Hat Bugzilla #989755

CVE-2013-2121: bookmarks remote code execution

Bookmarks could be created in Foreman containing data that was later executed arbitrarily when reading the bookmark.

Thanks to Ramon de C Valle of the Red Hat Product Security Team for discovering this issue.

  • Fix released in Foreman 1.2.0
  • Redmine issue #2631
  • Red Hat Bugzilla #968166

CVE-2013-2113: admin user creation, privilege escalation

Non-admin user with permissions to create or edit other users were able to change the admin flag, or assign roles that they themselves do not have, enabling a privilege escalation.

Thanks to Ramon de C Valle of the Red Hat Product Security Team for discovering this issue.

  • Fix released in Foreman 1.2.0
  • Redmine issue #2630
  • Red Hat Bugzilla #966804

CVE-2013-0210: Arbitrary command execution risk in smart proxy

Requests to the smart proxy Puppet run API were not properly escaped when running the Puppet command, leading to possible arbitrary command execution.

  • Fix released in Foreman 1.2.0

CVE-2013-0187: XMLHttpRequest bypasses authorization

XMLHttpRequest or AJAX requests to Foreman were not subject to authorization checks, enabling privilege escalation for authenticated users.

  • Fix released in Foreman 1.1

CVE-2013-0174: exposed hashed root passwords can be retrieved by unauthenticated remote users

The external node classifier (ENC) API in Foreman was accessible to any remote host and the output would contain the hashed root psasword (used for unattended installation). Authentication and authorization features were added to the ENC API to secure this data.

Thanks to Andreas Rogge for discovering this issue.

  • Fix released in Foreman 1.1
  • Redmine issue #2069

CVE-2013-0173: insecure fixed salt "foreman" for passwords

The salt used to hash root passwords (used for unattended installation) was fixed to the string "foreman" instead of being randomized.

  • Fix released in Foreman 1.1
  • Redmine issue #2069

CVE-2013-0171: import allows unauthenticated YAML uploads/parsing leading to arbitrary code execution

Fact and report import APIs in Foreman were accessible to any remote host and accepted YAML input, allowing arbitrary objects to be created on the Foreman server via YAML. Authentication and authorization features were added to the import APIs to prevent this.

  • Fix released in Foreman 1.1
  • Redmine issue #2121

CVE-2012-5648: SQL injection through search mechanism

Input to the search mechanism in Foreman was not escaped when constructing queries, enabling SQL injection into the resulting query.

  • Fix released in Foreman 1.0.2

CVE-2012-5477: world writable files in smart proxy

The smart proxy daemon ran with a umask of 0, causing files and directories written by it to have world-writable bits set. Files managed by the smart proxy could be modified by local users on the same host.

  • Fix released in Foreman 1.1
  • Redmine issue #1929

GPG keys

The Foreman project uses multiple GPG keys to sign packages and release artifacts. All stable releases will be signed by one of the keys. Nightly and plugin Debian packages will be signed, while nightly and plugin RPM packages will not (this may change in the future).

Signing for the Debian family of operating systems is via secure apt and more information, including verification steps can be found on the Debian web site. RPMs themselves are signed and can be verified using rpm --checksig PACKAGE. All yum repository configs set up by foreman-release RPMs or the installer will enable GPG checking by default.

Key management is changing at the time of writing to cycle nightly keys every two years, and issue limited duration keys per stable release.

Key ID Fingerprint Description Created Expires Revoked Notes
E775FF07 1DCB 15D1 2CA1 40EE F494 7E57 66CF 053F E775 FF07 Foreman Archive Signing Key 2010-11-10 2014-07-08 Used up to Foreman 1.5.1
1AA043B8 7059 542D 5AEA 367F 7873 2D02 B348 4CB7 1AA0 43B8 Foreman Automatic Signing Key (2014) 2014-07-01 2016-06-30
563278F6 AE0A F310 E2EA 96B6 B6F4 BD72 6F86 00B9 5632 78F6 Foreman Automatic Signing Key (2016) 2016-04-08 2018-04-08
667D1F07 503E FA96 89AA AD57 D693 6514 A91E 2984 667D 1F07 Foreman Release Signing Key (1.6) 2014-08-14 2015-08-14
2D762E88 730A 9338 F93E E729 2EAC 2052 4C25 8BD4 2D76 2E88 Foreman Release Signing Key (1.7) 2014-11-10 2016-11-09
225C9B71 64E3 7B1F A6C0 2416 6B53 5495 28F5 A69D 225C 9B71 Foreman Release Signing Key (1.8) 2015-03-09 2016-03-08
6E2A21BF BEA5 E3F6 AF59 7107 0241 4514 E05F 7157 6E2A 21BF Foreman Release Signing Key (1.9) 2015-06-26 2016-06-25
BE67E9DA 9EFD 673A 649D 77F5 C615 44AC C1B2 621D BE67 E9DA Foreman Release Signing Key (1.10) 2015-10-07 2016-10-06
3494A06D 6681 20FA 0528 3FD2 AF60 FC3A 335F 3A45 3494 A06D Foreman Release Signing Key (1.11) 2016-02-17 2017-02-16

Key changes in July 2014

In July 2014 after a server was compromised, the existing GPG key (0xE775FF07) was revoked and replaced with a new key (0x1AA043B8) as a precaution. All existing packages were re-signed with the new key and thereafter, new major releases are signed with new per-release keys.

All users with the old key trusted are urged to immediately disable this as follows:

  • Debian users must run sudo apt-key del E775FF07
  • RPM users must run sudo rpm -e gpg-pubkey-e775ff07-4cda3cf9

More information is available in the announcement.

There aren’t any published security advisories