OpenCore EFI for Intel Hackintosh (macOS 10.13 - 14.0)

Specification

Component	Model
CPU	Intel i9-13900K (24) @ 3.20GHz
Motherboard	ROG MAXIMUS Z790 HERO
RAM	32GB (2x 16GB) Kingston FURY @ 5200MHz
Audio Chipset	ALC4082
GPU	Radeon RX 570 4GB
OS Disk (SSDM2)	SSD Kingston NV2 M.2 2280 NVMe PCIe
WiFi & Bluetooth	Intel AX210 / BCM4350C2
macOS version	14.0 (23A344) x86_64

macOS version: 14.0 (23A344) x86_64
OpenCore version: 0.9.6

Credits

• [Bootloader] OpenCore
• [Driver] OpenRuntime
• [Driver] HFSPlus
• [Kext] Lilu
• [Kext] VirtualSMC
• [Kext] WhateverGreen
• [Kext] AppleALC

Compatible macOS versions

• High Sierra (10.13.x)
• Mojave (10.14.x)
• Catalina (10.15.x)
• Big Sur (10.16/11.4)
• Monterey (12.1)
• Ventura (13.5)
• Sonoma (14.0)

How to use

1. Make your USB installer with this guide
2. Clone the repository and paste "BOOT" and "OC" directories into your's pendrive "EFI" folder
3. Download GenSMBIOS to generate unique SMBIOS information. Run it and select Generate SMBIOS, as the model select iMacPro1,1.
4. Open config.plist with ProperTree and go to PlatformInfo > Generic. Set MLB (Board Serial), SystemSerialNumber (Serial) and SystemUUID (SmUUID) to generated values. Change ROM to your network card's MAC address without the : character. How to get MAC Address?
5. Boot it!

You CAN NOT use SMBIOS from this repository, it MUST be unique for every macOS installation

Other guides

If you have any problems with installation or booting your macOS, kernel panics or another system related issue check OC configuration guide
If something else isn't working properly (for example USB ports, iServices, DRM/Netflix) check Post-Install guide

• Creating USB installer: *click*
• OpenCore configuration: *click*
• Post-Install: *click*
• Troubleshooting: *click*
• ACPI patching: *click*
• USB mapping: *click*