Working Watermeters

[huizebruin]

At this moment i know this ones are working.

Watermerk type : Extra info : Land: Sensor
Itron NL Npn sensor
Sensus NL Npn sensor # Metaal zit in het rode wijzertje
Actaris NL Npn sensor
Elster NL Npn sensor
Maddalena BE Npn sensor

or other meters but the must have a turning weel with metal inside or on top of it.

When u have a other meter u can post it here.

[DJBenson]

I think this Elster meter (UK) will work?

[huizebruin]

i see a metal half moon on the right bottom, then it will work with a 8mm npn sensor.

[cleveHEX]

I guess this could work too?

[huizebruin]

Yes I think it's going to work on your meter.

[physje]

This works with me.

Elster V200 in combination with a TL-W5MC1 proximity sensor (C1-5V NPN NO; AliExpress).
The bracket is from Willem Hol on Thingiverse

[physje]

Don't know if it's due to the sensor or something else, but the watermeter is not very stable lately.
It hangs quite a lot.
Curious to see if more people have the same experience with this sensor

[huizebruin]

What is your problem?

I'm using it now for 2 years without any problem.

Did you build the S0tool by yourself?

If you're interested and you're a Dutch or Belgium person, check out my discord, link is on my website.
And we can chat about your problems in Dutch. There are a lot more users in the group that are using it for a while.

[HobbitBluelabel]

Hi, In my case the watermeter is very stable for over a year now, no problems at all... Hartelijke groet, Jan-Willem van den Hoek Op wo 6 dec 2023 om 18:31 schreef Matthijs Draijer ***@***.***

…

: Don't know if it's due to the sensor or something else, but the watermeter is not very stable. It hangs quite a lot. Curious to see if more people have the same experience — Reply to this email directly, view it on GitHub <#57 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARTIFW5W7TMAXQVTDS5NNN3YICTYBAVCNFSM6AAAAAARWRMQEGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TONZZGA4DA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[physje]

The Elster V200 in combination with a TL-W5MC1 proximity sensor is stable in you case?
That means, I cannot blame the sensor.

[HobbitBluelabel]

Maybe it is better to define "unstable" In your case. What is happening, how frequent and how do you solve it? What did you try to solve it? What hardware/software do you use? A.s.o. Op wo 6 dec 2023 18:36 schreef Matthijs Draijer ***@***.***>:

…

The Elster V200 in combination with a TL-W5MC1 proximity sensor is stable in you case? That means, I cannot blame the sensor. — Reply to this email directly, view it on GitHub <#57 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARTIFWYB7TM5IX4O7RSWZHLYICULTAVCNFSM6AAAAAARWRMQEGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TONZZGEZDS> . You are receiving this because you commented.Message ID: ***@***.***>

[teras]

Hello community. I am thinking of making my own meter as well, since I need a ESP32 (I'll try to make it also a BT hotspot, so that I'll be informed with a Mi Flora device the state of the soil) and not a ESP8266 that the ready kits provide).

I am confused though if the C1-5V NPN NO device , as mentioned earlier, would work with confidence. I prefer the flat setting , since my meter is on the wall, and it'll be a PITA to make it with the regular sensor, @HobbitBluelabel do you have the same flat sensor? Should I go with this design or should I do something different, based on @physje feedback?

[huizebruin]

Esp32 doesn't handle 5v to the output, and ports.
The only one is at this point the esp82 Wemos d1 mini.

[teras]

This makes sense. One more question. Here the meters that are sold don't have this metallic "moon like" pointer. Still, all of them claim that there are using magnetic transmission ; but probably this is not enough. Should this "moon-like" pointer exist, or, as far as you know, other types might work too?

[huizebruin]

Do you have a picture of it?

[teras]

I haven't bought it yet; still evaluating my options.

In order to reduce clutter in this thread, I put the images here. Please click to open it

[Atlantis1971]

Hi there,

I have this water counter. I suppose it's not right to realize the water meter as described above, isn't it?

If not, could you tell me which products are better to buy between Itron, Sensus, Actaris, Elster and Maddalena ones?

Thank you.

Alex

[huizebruin]

I dont know that type of meter.
i dont know witch type is better , i have here the Sensus meter.

[Atlantis1971]

Hi there,
thank you to @huizebruin for the answer.

So, considering I will change it, anyone knows a water meter running in Home Assistant?

Thank you.

Alex