A simple interface to DALI lighting, using python-dali.
Generates plain text reports from the command line, or emails HTML formatted reports.
Can issue some basic lighting control commands (DAPC etc.) from the command line, targetted at a single device, a group, a whole DALI bus or a whole site.
Currently assumes the DALI bus is connected via daliserver, but should be simple to adapt to other interfaces if necessary.
Configuration is in TOML. An abbreviated example:
[haymakers]
name = "Haymakers"
email-to = [
"sde@individualpubs.co.uk",
]
email-from = "Lighting Status <sde@individualpubs.co.uk>"
[haymakers.buses]
main.hostname = "icarus.haymakers.i.individualpubs.co.uk"
main.port = 55825
[[haymakers.gear]]
bus = "main"
address = 46
name = "Garden corridor"
[[haymakers.gear]]
bus = "main"
address = 12
name = "Spirits store"
[[haymakers.gear]]
bus = "main"
address = 26
name = "Cellar back corner"
[[haymakers.gear]]
bus = "main"
address = 27
name = "Cellar entrance"
related-emergency = 11
First ensure poetry is installed, then clone this repository.
Run poetry install to install the various dependencies.
Check all sites with a verbose report:
poetry run licon -v check
Send reports by email:
poetry run licon email
Send the "Up" command to a light:
poetry run licon up haymakers/main/12
Set a group of lights to a particular level:
poetry run licon level haymakers/main/g2 128
Broadcast the "Off" command on a bus:
poetry run licon off haymakers/main