MPU9250

Arduino library for MPU9250 Nine-Axis (Gyro + Accelerometer + Compass) MEMS MotionTracking™ Device

This library is based on the great work by kriswiner, and re-writen for the simple usage.

Usage

Simple Measurement

#include "MPU9250.h"

MPU9250 mpu;

void setup()
{
    Serial.begin(115200);

    Wire.begin();

    delay(2000);
    mpu.setup();
}

void loop()
{
    static uint32_t prev_ms = millis();
    if ((millis() - prev_ms) > 16)
    {
        mpu.update();
        mpu.print();

        Serial.print("roll  (x-forward (north)) : ");
        Serial.println(mpu.getRoll());
        Serial.print("pitch (y-right (east))    : ");
        Serial.println(mpu.getPitch());
        Serial.print("yaw   (z-down (down))     : ");
        Serial.println(mpu.getYaw());

        prev_ms = millis();
    }
}

Calibration

#include "MPU9250.h"

MPU9250 mpu;

void setup()
{
    Serial.begin(115200);

    Wire.begin();

    delay(2000);
    mpu.setup();

    delay(5000);

    // calibrate anytime you want to
    mpu.calibrateAccelGyro();
    mpu.calibrateMag();

    mpu.printCalibration();
}

void loop()
{
}

License

MIT

Acknowledgments / Contributor

• Yuta Asai