Configuration options

GitLab is configured by setting the relevant options in /etc/gitlab/gitlab.rb. See package defaults for a list of default settings and visit the gitlab.rb.template for a complete list of available options. New installations starting from GitLab 7.6, will have all the options of the template as of installation listed in /etc/gitlab/gitlab.rb by default.

Configuring the external URL for GitLab

In order for GitLab to display correct repository clone links to your users it needs to know the URL under which it is reached by your users, e.g. http://gitlab.example.com. Add or edit the following line in /etc/gitlab/gitlab.rb:

external_url "http://gitlab.example.com"

Run sudo gitlab-ctl reconfigure for the change to take effect.

NOTE: Note: After you change the external URL, it is recommended that you also invalidate the Markdown cache.

Configuring a relative URL for Gitlab

NOTE: Note: Relative URL support in Omnibus GitLab is experimental and was introduced in version 8.5. For source installations there is a separate document.

While it is recommended to install GitLab in its own (sub)domain, sometimes this is not possible due to a variety of reasons. In that case, GitLab can also be installed under a relative URL, for example https://example.com/gitlab.

Note that by changing the URL, all remote URLS will change, so you'll have to manually edit them in any local repository that points to your GitLab instance.

Relative URL requirements

Starting with 8.17 packages, there is no need to recompile assets.

The Omnibus GitLab package is shipped with pre-compiled assets (CSS, JavaScript, fonts, etc.). If you are running a package prior to 8.17 and you configure Omnibus with a relative URL, the assets will need to be recompiled, which is a task which consumes a lot of CPU and memory resources. To avoid out-of-memory errors, you should have at least 2GB of RAM available on your system, while we recommend 4GB RAM, and 4 or 8 CPU cores.

Enable relative URL in GitLab

Follow the steps below to enable relative URL in GitLab:

(Optional) If you run short on resources, you can temporarily free up some memory by shutting down Unicorn and Sidekiq with the following command:
```
sudo gitlab-ctl stop unicorn
sudo gitlab-ctl stop sidekiq
```
Set the external_url in /etc/gitlab/gitlab.rb:
```
external_url "https://example.com/gitlab"
```
In this example, the relative URL under which GitLab will be served will be /gitlab. Change it to your liking.
Reconfigure GitLab for the changes to take effect:
```
sudo gitlab-ctl reconfigure
```
Restart the services so that Unicorn and Sidekiq picks up the changes
```
sudo gitlab-ctl restart
```

If you stumble upon any issues, see the troubleshooting section.

Disable relative URL in GitLab

To disable the relative URL, follow the same steps as above and set up the external_url to a one that doesn't contain a relative path. You may need to explicitly restart Unicorn after the reconfigure task is done:

sudo gitlab-ctl restart unicorn

If you stumble upon any issues, see the troubleshooting section.

Relative URL troubleshooting

If you notice any issues with gitlab assets appearing broken after moving to a relative url configuration (like missing images or unresponsive components) please raise an issue in GitLab CE with the Frontend label.

If you are running a version prior to 8.17 and for some reason the asset compilation step fails (i.e. the server runs out of memory), you can execute the task manually after you addressed the issue (e.g. add swap):

sudo NO_PRIVILEGE_DROP=true USE_DB=false gitlab-rake assets:clean assets:precompile
sudo chown -R git:git /var/opt/gitlab/gitlab-rails/tmp/cache

User and path might be different if you changed the defaults of user['username'], user['group'] and gitlab_rails['dir'] in gitlab.rb. In that case, make sure that the chown command above is run with the right username and group.

Loading external configuration file from non-root user

Omnibus-gitlab package loads all configuration from /etc/gitlab/gitlab.rb file. This file has strict file permissions and is owned by the root user. The reason for strict permissions and ownership is that /etc/gitlab/gitlab.rb is being executed as Ruby code by the root user during gitlab-ctl reconfigure. This means that users who have write access to /etc/gitlab/gitlab.rb can add configuration that will be executed as code by root.

In certain organizations it is allowed to have access to the configuration files but not as the root user. You can include an external configuration file inside /etc/gitlab/gitlab.rb by specifying the path to the file:

from_file "/home/admin/external_gitlab.rb"

Please note that code you include into /etc/gitlab/gitlab.rb using from_file will run with root privileges when you run sudo gitlab-ctl reconfigure. Any configuration that is set in /etc/gitlab/gitlab.rb after from_file is included will take precedence over the configuration from the included file.

Storing Git data in an alternative directory

By default, omnibus-gitlab stores the Git repository data under /var/opt/gitlab/git-data. The repositories are stored in a subfolder repositories. You can change the location of the git-data parent directory by adding the following line to /etc/gitlab/gitlab.rb.

git_data_dirs({ "default" => { "path" => "/mnt/nas/git-data" } })

You can also add more than one git data directory by adding the following lines to /etc/gitlab/gitlab.rb instead.

git_data_dirs({
  "default" => { "path" => "/var/opt/gitlab/git-data" },
  "alternative" => { "path" => "/mnt/nas/git-data" }
})

If you're running Gitaly on its own server remember to also include the gitaly_address for each git data directory. See the documentation on configuring Gitaly.

Note that the target directories and any of its subpaths must not be a symlink.

Run sudo gitlab-ctl reconfigure for the changes to take effect.

If you already have existing Git repositories in /var/opt/gitlab/git-data you can move them to the new location as follows:

# Prevent users from writing to the repositories while you move them.
sudo gitlab-ctl stop

# Note there is _no_ slash behind 'repositories', but there _is_ a
# slash behind 'git-data'.
sudo rsync -av /var/opt/gitlab/git-data/repositories /mnt/nas/git-data/

# Start the necessary processes and run reconfigure to fix permissions
# if necessary
sudo gitlab-ctl upgrade

# Double-check directory layout in /mnt/nas/git-data. Expected output:
# repositories
sudo ls /mnt/nas/git-data/

# Done! Start GitLab and verify that you can browse through the repositories in
# the web interface.
sudo gitlab-ctl start

Changing the name of the Git user / group

By default, omnibus-gitLab uses the user name git for Git gitlab-shell login, ownership of the Git data itself, and SSH URL generation on the web interface. Similarly, git group is used for group ownership of the Git data.

We do not recommend changing the user/group of an existing installation because it can cause unpredictable side-effects. If you still want to do change the user and group, you can do so by adding the following lines to /etc/gitlab/gitlab.rb.

user['username'] = "gitlab"
user['group'] = "gitlab"

Run sudo gitlab-ctl reconfigure for the change to take effect.

Note that if you are changing the username of an existing installation, the reconfigure run won't change the ownership of the nested directories so you will have to do that manually. Make sure that the new user can access repositories as well as the uploads directory.

Specify numeric user and group identifiers

omnibus-gitlab creates users for GitLab, PostgreSQL, Redis and NGINX. You can specify the numeric identifiers for these users in /etc/gitlab/gitlab.rb as follows.

user['uid'] = 1234
user['gid'] = 1234
postgresql['uid'] = 1235
postgresql['gid'] = 1235
redis['uid'] = 1236
redis['gid'] = 1236
web_server['uid'] = 1237
web_server['gid'] = 1237

Run sudo gitlab-ctl reconfigure for the changes to take effect.

Disable user and group account management

By default, omnibus-gitlab takes care of creating system user and group accounts as well as keeping the information updated. These system accounts run various components of the package. Most users do not need to change this behaviour. However, if your system accounts are managed by other software, eg. LDAP, you might need to disable account management done by the package.

In order to disable user and group accounts management, in /etc/gitlab/gitlab.rb set:

manage_accounts['enable'] = false

Warning Omnibus-gitlab still expects users and groups to exist on the system where omnibus-gitlab package is installed.

By default, omnibus-gitlab package expects that following users exist:

# GitLab user (required)
git

# Web server user (required)
gitlab-www

# Redis user for GitLab (only when using packaged Redis)
gitlab-redis

# Postgresql user (only when using packaged Postgresql)
gitlab-psql

# Prometheus user for prometheus monitoring and various exporters
gitlab-prometheus

# GitLab Mattermost user (only when using GitLab Mattermost)
mattermost

# GitLab Registry user (only when using GitLab Registry)
registry

# GitLab Consul user (only when using GitLab Consul)
gitlab-consul

By default, omnibus-gitlab package expects that following groups exist:

# GitLab group (required)
git

# Web server group (required)
gitlab-www

# Redis group for GitLab (only when using packaged Redis)
gitlab-redis

# Postgresql group (only when using packaged Postgresql)
gitlab-psql

# Prometheus user for prometheus monitoring and various exporters
gitlab-prometheus

# GitLab Mattermost group (only when using GitLab Mattermost)
mattermost

# GitLab Registry group (only when using GitLab Registry)
registry

# GitLab Consul group (only when using GitLab Consul)
gitlab-consul

You can also use different user/group names but then you must specify user/group details in /etc/gitlab/gitlab.rb, eg.

# Do not manage user/group accounts
manage_accounts['enable'] = false

# GitLab
user['username'] = "custom-gitlab"
user['group'] = "custom-gitlab"
user['shell'] = "/bin/sh"
user['home'] = "/var/opt/custom-gitlab"

# Web server
web_server['username'] = 'webserver-gitlab'
web_server['group'] = 'webserver-gitlab'
web_server['shell'] = '/bin/false'
web_server['home'] = '/var/opt/gitlab/webserver'

# Postgresql (not needed when using external Postgresql)
postgresql['username'] = "postgres-gitlab"
postgresql['group'] = "postgres-gitlab"
postgresql['shell'] = "/bin/sh"
postgresql['home'] = "/var/opt/postgres-gitlab"

# Redis (not needed when using external Redis)
redis['username'] = "redis-gitlab"
redis['group'] = "redis-gitlab"
redis['shell'] = "/bin/false"
redis['home'] = "/var/opt/redis-gitlab"

# And so on for users/groups for GitLab Mattermost

Moving the home directory for a user

NOTE: Note: For the GitLab user, it is recommended that the home directory is set in local disk (ie not NFS) for better performance. When setting it in NFS, git requests will need to make another network request to read the git configuration and will increase latency in git operations.

In order to move an existing home directory, GitLab services will need to be stopped and some downtime is required.

Stop GitLab

gitlab-ctl stop

Stop the runit server.

# Using systemctl (Debian => 9 - Stretch):
sudo systemctl stop gitlab-runsvdir

# Using upstart (Ubuntu <= 14.04):
sudo initctl stop gitlab-runsvdir

# Using systemd (CentOS, Ubuntu >= 16.04):
systemctl stop gitlab-runsvdir.service

Change the home directory. If you had existing data you will need to manually copy/rsync it to these new locations.

usermod -d /path/to/home USER

Change the configuration setting in your gitlab.rb.

user['home'] = "/var/opt/custom-gitlab"

Start the runit server

# Using systemctl (Debian => 9 - Stretch):
sudo systemctl start gitlab-runsvdir

# Using upstart (Ubuntu <= 14.04):
sudo initctl start gitlab-runsvdir

# Using systemd (CentOS, Ubuntu >= 16.04):
systemctl start gitlab-runsvdir.service

Run a reconfigure

gitlab-ctl reconfigure

If the runnit service is not stopped and the home directories are not manually moved for the user, GitLab will encounter an error while reconfiguring:

account[GitLab user and group] (gitlab::users line 28) had an error: Mixlib::ShellOut::ShellCommandFailed: linux_user[GitLab user and group] (/opt/gitlab/embedded/cookbooks/cache/cookbooks/package/resources/account.rb line 51) had an error: Mixlib::ShellOut::ShellCommandFailed: Expected process to exit with [0], but received '8'
---- Begin output of ["usermod", "-d", "/var/opt/gitlab", "git"] ----
STDOUT:
STDERR: usermod: user git is currently used by process 1234
---- End output of ["usermod", "-d", "/var/opt/gitlab", "git"] ----
Ran ["usermod", "-d", "/var/opt/gitlab", "git"] returned 8

Please make sure to follow the above instructions to avoid this issue.

Disable storage directories management

The omnibus-gitlab package takes care of creating all the necessary directories with the correct ownership and permissions, as well as keeping this updated.

Some of these directories will hold large amount of data so in certain setups, these directories will most likely be mounted on a NFS (or some other) share.

Some types of mounts won't allow automatic creation of directories by root user (default user for initial setup), eg. NFS with root_squash enabled on the share. To work around this the omnibus-gitlab package will attempt to create these directories using the directory's owner user.

If you have the /etc/gitlab directory mounted, you can turn off management of that directory.

In /etc/gitlab/gitlab.rb set:

manage_storage_directories['manage_etc'] = false

If you are mounting all GitLab's storage directories, each on a seperate mount, you should completely disable the management of storage directories.

In order to disable management of these directories, in /etc/gitlab/gitlab.rb set:

manage_storage_directories['enable'] = false

Warning The omnibus-gitlab package still expects these directories to exist on the filesystem. It is up to the administrator to create and set correct permissions if this setting is set.

Enabling this setting will prevent the creation of the following directories:

Default location	Permissions	Ownership	Purpose
`/var/opt/gitlab/git-data`	0700	git:root	Holds repositories directory
`/var/opt/gitlab/git-data/repositories`	2770	git:git	Holds git repositories
`/var/opt/gitlab/gitlab-rails/shared`	0751	git:gitlab-www	Holds large object directories
`/var/opt/gitlab/gitlab-rails/shared/artifacts`	0700	git:root	Holds CI artifacts
`/var/opt/gitlab/gitlab-rails/shared/lfs-objects`	0700	git:root	Holds LFS objects
`/var/opt/gitlab/gitlab-rails/uploads`	0700	git:root	Holds user attachments
`/var/opt/gitlab/gitlab-rails/shared/pages`	0750	git:gitlab-www	Holds user pages
`/var/opt/gitlab/gitlab-ci/builds`	0700	git:root	Holds CI build logs
`/var/opt/gitlab/.ssh`	0700	git:git	Holds authorized keys

Only start Omnibus-GitLab services after a given filesystem is mounted

If you want to prevent omnibus-gitlab services (NGINX, Redis, Unicorn etc.) from starting before a given filesystem is mounted, add the following to /etc/gitlab/gitlab.rb:

# wait for /var/opt/gitlab to be mounted
high_availability['mountpoint'] = '/var/opt/gitlab'

Run sudo gitlab-ctl reconfigure for the change to take effect.

Configuring runtime directory

When Prometheus monitoring is enabled, GitLab-monitor will conduct measurements of each Unicorn process (Rails metrics). Every Unicorn process will need to write a metrics file to a temporary location for each controller request. Prometheus will then collect all these files and process their values.

In order to avoid creating disk I/O, the omnibus-gitlab package will use a runtime directory.

During reconfigure, package will check if /run is a tmpfs mount. If it is not, warning will be printed:

Runtime directory '/run' is not a tmpfs mount.

and Rails metrics will be disabled.

To enable Rails metrics again, create a tmpfs mount and specify it in /etc/gitlab/gitlab.rb:

runtime_dir '/path/to/tmpfs'

NOTE: Note: Please note that there is no = in the configuration.

Run sudo gitlab-ctl reconfigure for the settings to take effect.

Configuring Rack Attack

To prevent abusive clients doing damage, GitLab uses the Rack Attack gem. Check this page for more information.

Disabling automatic cache cleaning during installation

If you have large gitlab installation, you might not want to run rake cache:clean task. As it can take long time to finish. By default, cache clear task will run automatically during reconfigure.

Edit /etc/gitlab/gitlab.rb:

# This is advanced feature used by large gitlab deployments where loading
# whole RAILS env takes a lot of time.
gitlab_rails['rake_cache_clear'] = false

Don't forget to remove the # comment characters at the beginning of this line.

Enabling/Disabling Rack Attack and setting up basic auth throttling

Next configuration settings control Rack Attack:

gitlab_rails['rack_attack_git_basic_auth'] = {
  'enabled' => true, # Enable/Disable Rack Attack
  'ip_whitelist' => ["127.0.0.1"], # Whitelisted urls
  'maxretry' => 10, # Limit the number of Git HTTP authentication attempts per IP
  'findtime' => 60, # Reset the auth attempt counter per IP after 60 seconds
  'bantime' => 3600 # Ban an IP for one hour (3600s) after too many auth attempts
}

Setting up paths to be protected by Rack Attack

If you want to change default protected paths set gitlab_rails['rack_attack_protected_paths'] in config file.

Warning This action will overwrite list provided by omnibus-gitlab:

gitlab_rails['rack_attack_protected_paths'] = [
  '/users/password',
  '/users/sign_in',
  '/api/#{API::API.version}/session.json',
  '/api/#{API::API.version}/session',
  '/users',
  '/users/confirmation',
  '/unsubscribes/',
  '/import/github/personal_access_token'
]

NOTE: Note: All paths are relative to the gitlab url. Do not include relative URL if you set it up.

Warning If path contains variables which need to be interpolated by rails(ex. #{API::API.version}) then you need to escape curly brackets or use single quoted string. For example "/api/#\{API::API.version\}/session.json" or '/api/#{API::API.version}/session.json'

Setting up throttling for 'paths to be protected'

Use next options to control throttling 'limit' and 'period':

gitlab_rails['rate_limit_requests_per_period'] = 10
gitlab_rails['rate_limit_period'] = 60

Run sudo gitlab-ctl reconfigure for the change to take effect.

Disable impersonation

Disabling impersonation is documented in docs.gitlab.com.

Error Reporting and Logging with Sentry

Sentry is an error reporting and logging tool which can be used as SaaS or on premise. It's Open Source and you can browse it's source code repositiories here.

The following settings can be used to configure Sentry:

gitlab_rails['sentry_enabled'] = true
gitlab_rails['sentry_dsn'] = 'https://<key>@sentry.io/<project>'
gitlab_rails['sentry_clientside_dsn'] = 'https://<key>@sentry.io/<project>'
gitlab_rails['sentry_environment'] = 'production'

The Sentry Environment can be used to track errors and issues across several deployed GitLab environments, e.g. lab, development, staging, production.