-
Notifications
You must be signed in to change notification settings - Fork 37
Events
Sascha edited this page Mar 7, 2023
·
33 revisions
Name | Description | Support |
---|---|---|
BatteryInfo | Battery level (%) | Should work with all models |
ChargeState | Charging status | Should work with all models |
CleanReport | Cleaning status | Should work with all models |
DustCaseInfo | Indicates if the dust case is installed | Works only with a few models (e.g. OZMO 930) |
RelocationState | Relocation status | Should work with most 950 type models |
SleepStatus | Indicates if the device is in sleeping mode | Should work with most models |
WaterBoxInfo | Indicates if the water box is installed | Should work with most models with mopping system |
Name | Description | Support |
---|---|---|
CleanSpeed | Vacuum power level | Should work with most models that have different vacuum power levels |
ContinuousCleaningEnabled | Indicates if continuous cleaning mode is enabled | Should work with some models (tested on Deebot 901 and OZMO 930) |
DoNotDisturbEnabled | Indicates if do-not-disturb mode is enabled | Should work with some models (tested on Deebot 901 and OZMO 930) |
VoiceReportDisabled | Indicates if voice report is disabled | Should work with some models (untested) |
WaterLevel | Mopping water amount | Should work with most models with mopping system |
Name | Description | Support |
---|---|---|
CleanLog | JSON data of the last 20 cleanings | Should work with all models |
CleanLog_lastImageTimestamp | Timestamp of last cleaning image | Should work with all models with mapping functionality |
CleanLog_lastImageUrl | URL of last cleaning image | Should work with all models with mapping functionality |
CleanLog_lastSquareMeters | Cleaned area of the last cleaning | Should work with all models |
CleanLog_lastTimestamp | Timestamp of the last cleaning | Should work with all models |
CleanLog_lastTotalTimeString | Date and time of the last cleaning | Should work with all models |
CleanSum_totalNumber | Total number of cleanings | Should work with all models |
CleanSum_totalSeconds | Total time in seconds | Should work with all models |
CleanSum_totalSquareMeters | Total square meters | Should work with all models |
Name | Description | Support |
---|---|---|
LifeSpan_filter | Filter lifespan | Should work with all models |
LifeSpan_main_brush | Main brush lifespan | Should work with all models that have a main brush |
LifeSpan_side_brush | Side brush lifespan | Should work with all models |
For further information also check this article
Name |
---|
Maps |
MapSpotAreas |
MapSpotAreaInfo |
MapVirtualBoundaries |
MapVirtualBoundaryInfo |
Name | Description | Support |
---|---|---|
DeebotPosition | Current position where the bot is located (x, y, angle *) | |
DeebotPositionCurrentSpotAreaID | Current spot area ID where the bot is located | |
ChargePosition | Last charging position (x, y, angle *) |
*) angle: 0 = facing right, 90 = facing upwards, 180/-180 = facing left, -90 = facing downwards
Name |
---|
CurrentMapIndex |
CurrentMapMID |
CurrentMapName |
LastUsedAreaValues |
DeebotPositionIsInvalid |
Name |
---|
NetInfoIP |
NetInfoMAC |
NetInfoWifiSignal |
NetInfoWifiSSID |
For a full dictionary of error codes see here
Name |
---|
ErrorCode |
Error |
{
"filter": 65.44,
"side_brush": 70.56,
"main_brush": 90.72
}
{
"coords": "81,373,89",
"x": 81,
"y": 373,
"a": 89,
"invalid": false,
"spotAreaID": "0"
}
*) a = angle: 0 = facing right, 90 = facing upwards, 180/-180 = facing left, -90 = facing downwards
{
"coords": "81,373,-90",
"x": 81,
"y": 373,
"a": 89
}
{
"timestamp": 1620579088,
"squareMeters": 38,
"totalTime": 1623,
"totalTimeFormatted": "0h 27m 03s",
"imageUrl": "https://portal-eu.ecouser.net/api/lg/image/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx@xxxxxxxxx@xxxx"
}
{
"totalSquareMeters": 3129,
"totalSeconds": 162139,
"totalNumber": 389
}
{
"cleanStatus": "pause",
"waterInfo": {
"enabled": false,
"level": 4
}
}
{
"ip": "192.168.179.x",
"mac": "XX:XX:XX:XX:XX:XX",
"wifiSSID": "SomeRandomWiFiSSID",
"wifiSignal": "-52"
}
{
"error": "NoDustBox: Dust Bin Not installed",
"code": "110"
}
[
{
"sid": "16162855470839",
"cleanCmd":
{
"type": "auto"
},
"enabled": false,
"weekdays":
{
"Mon": false,
"Tue": false,
"Wed": false,
"Thu": false,
"Fri": false,
"Sat": true,
"Sun": false
},
"hour": 17,
"minute": 30,
"mapID": "1855832123"
},
{
"sid": "16162855470841",
"cleanCmd":
{
"type": "spotArea",
"spotAreas": "7,3"
},
"enabled": true,
"weekdays":
{
"Mon": false,
"Tue": false,
"Wed": false,
"Thu": false,
"Fri": false,
"Sat": true,
"Sun": true
},
"hour": 15,
"minute": 00,
"mapID": "1855832123"
}
]
Table of contents