NAMIZUN

This project is used to remove the limitation of asymmetric ratio for uploading and downloading Iranian servers

Installation

Important Note : use it on ubuntu +20 (python +3.8)

• 1) you need to install pip, redis & git:

sudo apt install python3-pip python3-venv redis git -y

• 2) you need to create a directory to clone the project:

mkdir /var/www/namizun && cd /var/www/namizun

• 3) Clone the project with Git:

git init

git remote add origin https://github.com/malkemit/namizun.git

git pull origin master

• 4) make virtual environment:

python3 -m venv /var/www/namizun/venv

• 5) Install the project requirements with pip by setup.py:

source /var/www/namizun/venv/bin/activate && cd /var/www/namizun && pip install . && deactivate

• 6) Create service for uploader.py (for running namizun script):

ln -s /var/www/namizun/else/namizun.service /etc/systemd/system/

Note: If you have installed the previous version, you will face the file exists error. Remove it with the following command:

rm /etc/systemd/system/namizun.service

Then enter the command of step 6 (ln command)

• 7) Reload the service files to include the new service:

sudo systemctl daemon-reload

• 8) To enable your service on every reboot:

sudo systemctl enable namizun.service

• 9) Start namizun service:

sudo systemctl start namizun.service

• 10) Create namizun command to execute menu.py

ln -s /var/www/namizun/else/namizun /usr/local/bin/ && chmod +x /usr/local/bin/namizun

Configuration

• You can use namizun tool to configure monitoring. Type the following command to run it:

namizun

• Note: Applying changes until the end of the uploader cycle does not affect.
  In fact, after the end of a round of the uploader cycle, the new configurations will have an effect.
  If you want the recorded event to take effect quickly, you can reload the core.py with the following command:

sudo systemctl restart namizun.service

Command list

• this is the menu!

• 1) Uploader Running : You can activate or deactivate the uploader by entering the number 1

• 2) Speed: By entering the number 2, you can specify the speed of the uploader.(max=5 normal=3 min=1)
  Note: that the higher the number, the higher the CPU consumption and the sending of larger buffers, and the possibility of being speed limited by the provider.

• 3) Coefficient: By entering the number 3, you can enter the limit announced by the provider.
  For example, if your ratio should be 10 uploads to 1 download, set the number to 10

  Important: Your upload and download information will be counted from your last reboot.
  In fact, as soon as you reboot the server, the amount of downloads and uploads in the program will be zero, and you must manually enter the amount of uploads and downloads you have had so far.

• 4) Total Upload Before Reboot: By entering the number 4, you can change your upload amount (use the graphs inside the provider panel and enter the correct amount)

• 5) Total Download Before Reboot: By entering the number 5, you can change your download amount

• 0) Exit: goodbye!

Notes:

• In this script, you don't need to buy a download host or another server or even upload to your foreign server.
  Only fake traffic will be sent to Iranian IPs, which will be lost!

• Although the essence of this script is used to attack, but due to the limited size of the buffer and the distribution of traffic between different IPs, this does not happen in practice.
  (To attack, many servers must send traffic to one IP, but this works exactly the opposite)

• This script is designed to upload up to 50 terabytes of traffic at maximum, it can be used on a server with minimal resources.

• If you want to use a speed of more than 3, be sure to pay attention to the CPU consumption.
  High CPU consumption will cause restrictions from the provider (it is better to have at least 2 CPU cores)

• If you are using a dedicated server, it is suggested to virtualize it and use your virtual servers.
  In this way, your traffic will be distributed among more IPs and will prevent you from being banned.

Donate:

If you enjoyed this script you could donate me by donating!
Your support allows me to continue my work, fight against Internet censorship in Iran

USDT (TRC20) : TDuBY7FpRkaMU1rhQjQa6sqpNdKhmM8Nx3

USDT (ERC20) : 0xFAFaf5D1e2e6a11F04e318430ff01031B63A58e1

Dash : XeCZbBwgoZpZi3RzqkbELvLVTaUCJY67ZL