Merge pull request #274 from networktocode/FragmentedPacket_eigrp-top

Added template for show ip eigrp topology

templates/cisco_ios_show_ip_eigrp_topology.template

@@ -0,0 +1,46 @@
+Value Filldown PROCESS_ID (\d+)
+Value Filldown ROUTER_ID (\d+\.\d+\.\d+\.\d+)
+Value Required CODE (\S+)
+Value ROUTE (\d+\.\d+\.\d+\.\d+)
+Value MASK (\d+)
+Value SUCCESSORS (\d+)
+Value FD (\d+)
+Value TAG (\d+)
+Value List ADV_ROUTER (\d+\.\d+\.\d+\.\d+|\w+)
+Value List OUT_INTERFACE (\S+)
+
+Start
+  # Captures Process ID and Router ID
+  ^.+AS\(${PROCESS_ID}\)/ID\(${ROUTER_ID}\)
+  # Skips over the code line that explains what each code means
+  ^Codes:
+  # Skips over the definitions for the codes
+  ^\s+\S+\s+-\s+
+  # Matches a route and captures if ${TAG} is use for the route and then moves to Gateway section
+  ^${CODE}\s+${ROUTE}/${MASK},\s+${SUCCESSORS}\s+successors,\s+FD\s+is\s+${FD},\s+tag\s+is\s+${TAG} -> Gateway
+  # Matches a route and captures it and then moves to Gateway section
+  ^${CODE}\s+${ROUTE}/${MASK},\s+${SUCCESSORS}\s+successors,\s+FD\s+is\s+${FD} -> Gateway
+  # If it doesn't match anything above, this just acknowledges a new line
+  ^\s*$$
+  # This will throw an error if there are no matches
+  ^. -> Error
+
+Gateway
+  # This captures the advertising router and outgoing interface
+  ^\s+via\s+${ADV_ROUTER},\s+${OUT_INTERFACE}
+  # This will not capture anything but if it encounters another route, it will continue and record what it already captured
+  ^\S+\s+(?:\d+(?:\.|)){4}/\d+,\s+\d+\s+successors -> Continue.Record
+  # These are the same as above and capture the next set of routes
+  ^${CODE}\s+${ROUTE}/${MASK},\s+${SUCCESSORS}\s+successors,\s+FD\s+is\s+${FD},\s+tag\s+is\s+${TAG}
+  ^${CODE}\s+${ROUTE}/${MASK},\s+${SUCCESSORS}\s+successors,\s+FD\s+is\s+${FD}
+  # If it encounters another AS/Router ID it will continue and record what it just captured
+  ^.+AS\(\d+\)/ID -> Continue.Record
+  # If it encounters it again, it will continue, but clear all captured data other than Filldown Values
+  ^.+AS\(\d+\)/ID -> Continue.Clearall
+  # It will start the process over again if it encounters a new process ID / router id
+  ^.+AS\(${PROCESS_ID}\)/ID\(${ROUTER_ID}\)
+  ^Codes: -> Start
+  # If it doesn't match anything above, this just acknowledges a new line
+  ^\s*$$
+  # This will throw an error if there are no matches
+  ^. -> Error

templates/index

@@ -120,6 +120,7 @@ cisco_ios_show_interface_transceiver.template, .*, cisco_ios, sh[[ow]] int[[erfa
 cisco_ios_show_lldp_neighbors_detail.template, .*, cisco_ios, sh[[ow]] lld[[p]] neig[[hbors]] det[[ail]]
 cisco_ios_show_cdp_neighbors_detail.template, .*, cisco_ios, sh[[ow]] c[[dp]] neig[[hbors]] det[[ail]]
 cisco_ios_show_interfaces_status.template, .*, cisco_ios, sh[[ow]] int[[erfaces]] st[[atus]]
+cisco_ios_show_ip_eigrp_topology.template, .*, cisco_ios, sh[[ow]] ip eigrp top[[ology]]
 cisco_ios_show_ip_source_binding.template, .*, cisco_ios, sh[[ow]] ip sou[[rce]] b[[inding]]
 cisco_ios_show_mac-address-table.template, .*, cisco_ios, sh[[ow]] m[[ac-address-table]]
 cisco_ios_show_ip_ospf_database.template, .*, cisco_ios, sh[[ow]] ip ospf data[[base]]

tests/cisco_ios/show_ip_eigrp_topology/cisco_ios_show_ip_eigrp_topology.parsed

@@ -0,0 +1,79 @@
+---
+parsed_sample:
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['TenGigabitEthernet1/1', 'TenGigabitEthernet2/1']
+  route: "66.128.208.232"
+  mask: "32"
+  adv_router: ['10.254.11.9', '10.254.11.33']
+  process_id: "100"
+  fd: "264448"
+  tag: ""
+  successors: "2"
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['Port-channel10']
+  route: "10.254.6.8"
+  mask: "30"
+  adv_router: ['10.254.6.14']
+  process_id: "100"
+  fd: "1024"
+  tag: ""  
+  successors: "1"
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['TenGigabitEthernet1/1', 'TenGigabitEthernet2/1']
+  route: "67.230.223.128"
+  mask: "28"
+  adv_router: ['10.254.11.9', '10.254.11.33']
+  process_id: "100"
+  fd: "5632"
+  tag: "53471"  
+  successors: "2"
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['GigabitEthernet9/29']
+  route: "10.255.10.5"
+  mask: "32"
+  adv_router: ['10.254.10.34']
+  process_id: "100"
+  fd: "130816"
+  tag: ""  
+  successors: "1"
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['Port-channel3']
+  route: "10.255.1.14"
+  mask: "32"
+  adv_router: ['10.254.1.34']
+  process_id: "100"
+  fd: "128768"
+  tag: ""  
+  successors: "1"
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['TenGigabitEthernet3/3']
+  route: "10.254.2.12"
+  mask: "30"
+  adv_router: ['10.254.2.22']
+  process_id: "100"
+  fd: "768"
+  tag: ""  
+  successors: "1"
+
+- router_id: "10.255.11.6"
+  code: "P"
+  out_interface: ['TenGigabitEthernet1/4', 'TenGigabitEthernet1/6', 'TenGigabitEthernet2/1', 'TenGigabitEthernet1/1', 'TenGigabitEthernet1/5', 'TenGigabitEthernet4/4', 'TenGigabitEthernet4/5', 'TenGigabitEthernet1/3']
+  route: "10.255.11.4"
+  mask: "32"
+  adv_router: ['10.254.56.6', '10.254.55.6', '10.254.11.33', '10.254.11.9', '10.254.52.6', '10.254.4.10', '10.254.4.14', '10.254.54.6']
+  process_id: "100"
+  fd: "128768"
+  tag: ""  
+  successors: "4"

tests/cisco_ios/show_ip_eigrp_topology/cisco_ios_show_ip_eigrp_topology.raw

@@ -0,0 +1,28 @@
+IP-EIGRP Topology Table for AS(100)/ID(10.255.11.6)
+
+Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
+       r - reply Status, s - sia Status
+
+P 66.128.208.232/32, 2 successors, FD is 264448
+        via 10.254.11.9, TenGigabitEthernet1/1
+        via 10.254.11.33, TenGigabitEthernet2/1
+P 10.254.6.8/30, 1 successors, FD is 1024
+        via 10.254.6.14, Port-channel10
+P 67.230.223.128/28, 2 successors, FD is 5632, tag is 53471
+        via 10.254.11.9, TenGigabitEthernet1/1
+        via 10.254.11.33, TenGigabitEthernet2/1
+P 10.255.10.5/32, 1 successors, FD is 130816
+        via 10.254.10.34, GigabitEthernet9/29
+P 10.255.1.14/32, 1 successors, FD is 128768
+        via 10.254.1.34, Port-channel3
+P 10.254.2.12/30, 1 successors, FD is 768
+        via 10.254.2.22, TenGigabitEthernet3/3
+P 10.255.11.4/32, 4 successors, FD is 128768
+        via 10.254.56.6, TenGigabitEthernet1/4
+        via 10.254.55.6, TenGigabitEthernet1/6
+        via 10.254.11.33, TenGigabitEthernet2/1
+        via 10.254.11.9, TenGigabitEthernet1/1
+        via 10.254.52.6, TenGigabitEthernet1/5
+        via 10.254.4.10, TenGigabitEthernet4/4
+        via 10.254.4.14, TenGigabitEthernet4/5
+        via 10.254.54.6, TenGigabitEthernet1/3