Snowhite

Mirror mirror, tell me who is the most beautiful

Blog article about Snowhite

Fetching deps

You need to fetch both node and elixir deps before playing with it. You can use the make deps target to do so.

Initial setup

Creating the project

Create a new phoenix project

mix phx.new my_mirror --no-ecto

If you want to use Ecto, you can, but Snowhite doesn't require it.

Creating the profiles

Snowhite makes use of different profile to better split information. You can create multiple profile with multiple modules for different use cases. You first need to create the profile manager like the following. You must at least include a :default profile.

We recommend that you pass in your timezone so the scheduler runs within your timezone. It fallbacks to UTC but if you want to use, for instance, the module Suntime, it might run at weird time instead of 1h am if you do not set your timezone. Unless, of course, if you live in the middle of the planet.

defmodule MyMirror.Profiles do
  use Snowhite, timezone: "America/Toronto"

  profile(:default, MyMirror.Profiles.Default)
end

You can create as much profile as you want as long as their name differs. You can switch between profile using either a param ?profile=another or a X-Snowhite-Profile: another header. It would then load the :another profile instead of :default

Creating a profile and registering modules

You can register any module in the Profile module using the register_module/3 macro.

defmodule MyMirror.Profiles.Default do
  use Snowhite.Builder.Profile

  configure(
    locale: "fr"
  )

  register_module(:top_left, Snowhite.Modules.Clock) # will be french
  register_module(:top_left, Snowhite.Modules.Clock, locale: "en") # will be english
end

It expects:

• A position; any of [top|middle|bottom]_[left|center|right] (ex. top_left, bottom_right, etc...)
• A module using either a Snowhite.Builder.Module or Phoenix.LiveView; Some examples modules are available in lib/modules see here for custom modules.
• A keyword list of options specific to module.

Route the profiles

In your Phoenix's router, add the following call

defmodule SnowhiteNboisvertWeb.Router do
  #...
  import Snowhite, only: [snowhite_router: 1]

  pipeline :browser do
    plug :accepts, ["html"]
    plug :fetch_session
    plug :fetch_flash
    plug :protect_from_forgery
    plug :put_secure_browser_headers
  end

  pipe_through :browser # Make sure you piped through the browser pipeline

  snowhite_router(SnowhiteNboisvert.Profiles)
end

Snowhite renders on /, so if you want to scope it under /mirror, for instance, you can do the following

scope "/mirror" do
  snowhite_router(SnowhiteNboisvert.Profiles)
end

Assets

Snowhite requires at least a js file located at ../deps/snowhite/assets/js/live.js. Even though it does not require a CSS file, you might want to import the one provided with Snowhite to have basic styling at ../deps/snowhite/assets/css/app.scss.

Creating modules

You can create your own modules using either the Snowhite.Builder.Module or a any raw Phoenix.LiveView component.

For most use case, you might prefer to use the Snowhite.Builder.Module as it includes some convenient functions. To use Phoenix.LiveView, refer to the documentation.

The only required function is render/1 as shown below.

defmodule Snowhite.Modules.HelloWorld do
  use Snowhite.Builder.Module

  def render(assigns) do
    ~L"""
      <h1>Hello world.</h1>
    """
  end
end

Other assigns

If you need other assigns in your module, you must override mount/1 to define those. That function recieves a socket with options and params assigned.

defmodule Snowhite.Modules.HelloWorld do
  use Snowhite.Builder.Module

  def mount(socket) do
    assign(socket, :message, "Hello, you weird person")
  end

  def render(assigns) do
    ~L"""
      <h1>@message</h1>
    """
  end
end

Using options

You must first defined supported options like the following

defmodule Snowhite.Modules.HelloWorld do
  use Snowhite.Builder.Module

  def module_options do
    %{
      message: :required, # Raises if :message option is missing
      color: {:optional, "white"} # Sets "white" if :color is missing
    }
  end

  # ...
end

You can then pass in options like below

defmodule MyMirror.Profiles.Default do
  use Snowhite.Builder.Profile

  register_module(:top_left, Snowhite.Modules.HelloWorld, message: "Hello, punk.")
end

And access those options in the socket assigns under the options key.

defmodule Snowhite.Modules.HelloWorld do
  use Snowhite.Builder.Module

  def module_options do
    %{
      message: :required,
      color: {:optional, "white"}
    }
  end

  def render(%{options: %{color: color, message: message}} = assigns) do
    ~L"""
      <h1 style="color: <%= color %>"><%= message %></h1>
    """
  end
end

Raises for bad options

If you were to provide an unsupported option to a module, it would raise. This is an expected behaviour as it could help spotting typos or unintended option passing.

defmodule Snowhite.Modules.HelloWorld do
  use Snowhite.Builder.Module

  def module_options do
    %{
      message: :required, # Raises if :message option is missing
      color: {:optional, "white"} # Sets "white" if :color is missing
    }
  end

  # ...
end

defmodule MyMirror.Profiles.Default do
  use Snowhite.Builder.Profile

  register_module(:top_left, Snowhite.Modules.HelloWorld, message: "Hello, punk.", locale: "fr")
end

In this example, an exception would raise saying that {:locale, "fr"} is not supported as option.

Data source

Even though it can work perfectly, we recommend creating genserver to keep/update the data your module will use. Mainly because opening 3 instances of the same Snowhite app will use one central source of truth but also because they will be kept in perfect sync. If you keep the data in the live view, opening three instances of the same module will load three times the same data and will be out of sync unless you are able to start the three of the at the e x a c t same time.

Default modules in Snowhite all includes a server, take a look to have a better understanding of it.

Convenient functions

Periodically sending events

The best way of working with periodic events is to add a Server that implements a GenServer to your module. Doing so will ensure that all instances of the app are sharing the exact same data and prevent visual failure as they will occur in the server. (See existing modules as inspiration)

Howerver, some modules might require some refresh/update at some point. To do so, you have access to the following helpers:

• every(ms, name, func): Will run a function every ms milliseconds under the event name. Note: Every name must be unique as it refers to handle_info/2 event name. If you want your module to have a configurable scheduled event, you can pass an atom instead of an integer for the ms. It will fetch the given option key from the as#stead of using an hardcoded timing

Bonus: To write miliseconds in a readable way, there is a sigil ~d that helps you write clocks. It supports hours, minutes and seconds in the following format

~d(1h) # 3_600_000
~d(1m) # 60_000
~d(1s) # 1_000
~d(6h30m1s) # 23_401_000

CSS

You might need some css to make this beautiful. To do so, create a file under assets/css/modules/my_module.scss and register it in assets/css/modules/_modules.scss. Now all you need is to fulfill the file.

The module is scoped under a div that has the module name as class. If your module is named Snowhite.Modules.SomeNice.Module, the class will be snowhite-modules-somenice-module. It is recommended that you scope all your styling under this. If you want to override anything else (colors, layout etc...), edit it inside over _override.scss.

Start dev server

We use direnv to setup environment. So create or edit ~/.envrc to add env variable if you need to prefixed with SNOWHITE_.

Example to override PORT, you add export SNOWHITE_PORT=1234 in ~/.envrc and you server will be exposed under 1234. (Note: Any change require server restart)

Start the dev server using make dev

TODO

• [] Write tests
• [] Extract OpenWeather client to it's own package
• [] Improve documentations
• [] Write guides
• [] Support multiple application names so we can have two clock with different city, for instance.