PSION Organiser II - Top Slot Monitoring
This repository holds files needed to create a Top Slot Montoring point for the Psion Organiser 2
All the files are required.
The default repository format for 3D files is STEP ( ISO 10303 ) due to its high fidelity. { STL files are surface geometry as opposed to solid model representations, often containing export processing artifacts }.
The default repository format for PCB files is GERBER .
FreeCAD may prove suitable for viewing, handling and, if desired modifying STEP files.
KiCad may prove suitable for viewing GERBER files.
The 3D model makes no accomodation for manufacturing tolerances, process or material - see Notes below.
The PCB is currently beta and has been tested, it remains your responsiblity to asses suitability!
The assembly of PCB and case has been tested, the PCB would benefit from a spacer between the PCB and case. The side cover works overly well, being more suited to a generic case infill than an easily removable cover in the current iteration.
See Organiser 2 Hardware forum, though see note below first.
All information is For Indication Only. No association, affiliation, recommendation, suitability, fitness for purpose should be assumed or is implied. Registered trademarks are owned by their respective registrants.