Skip to content

An unofficial Python library for Nextion smart display management

License

Notifications You must be signed in to change notification settings

py3-nextion/pynextion

Repository files navigation

Build Status

pynextion

A Python library for Nextion smart display management

Source: http://wiki.iteadstudio.com/Nextion_Instruction_Set

Wiring

To use a Nextion intelligent display you need:

Please follow the following wiring:

  • Red wire 5V
  • Black wire GND
  • Yellow wire (between Nextion RX and USB TTL TX or SBC TX)
  • Blue wire (between Nextion TX and USB TTL RX or SBC RX)

!!! warning

Do it at your own *risk*!

Bad wiring can result in damaging the Nextion display, the USB converter or maybe more.

If you don't know what you are doing, it's maybe safer not to try!

Running

unit tests

$ pytest -s tests

examples

$ pytest -s examples/draw.py

Default port is /dev/ttyUSB0 and is set in examples/config.py.

Other Python Nextion libraries

About

An unofficial Python library for Nextion smart display management

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published