Skip to content

new_ret_no_self false positive when returning impl Trait<Self> #7344

New issue

Have a question about this project? # for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “#”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? # to your account

Closed
nbdd0121 opened this issue Jun 11, 2021 · 1 comment · Fixed by #9733
Closed

new_ret_no_self false positive when returning impl Trait<Self> #7344

nbdd0121 opened this issue Jun 11, 2021 · 1 comment · Fixed by #9733
Assignees
Labels
C-bug Category: Clippy is not doing the correct thing I-false-positive Issue: The lint was triggered on code it shouldn't have

Comments

@nbdd0121
Copy link
Contributor

nbdd0121 commented Jun 11, 2021

Lint name: new_ret_no_self

pub struct Foo;

impl Foo {
    pub fn new() -> impl Into<Self> {
        Foo
    }
}

causes a warning where it shouldn't. impl Into here can be any trait that has Self in generic arguments.

This is similar to #4359 but instead of Future<Output = Self> it's Into<Self>. #4365's title implies that this should be allowed but actually it only deals with associated types, not type parameters.

cargo clippy -V: 0.1.54 (2021-06-09 eab201d)

@nbdd0121 nbdd0121 added C-bug Category: Clippy is not doing the correct thing I-false-positive Issue: The lint was triggered on code it shouldn't have labels Jun 11, 2021
@nbdd0121
Copy link
Contributor Author

@rustbot claim

@bors bors closed this as completed in 33137dd Oct 28, 2022
fbq pushed a commit to Rust-for-Linux/linux that referenced this issue Oct 1, 2023
The clippy false positive triggering `new_ret_no_self` lint when using
`pin_init!` macro is fixed in 1.67, so remove all `#[allow]`s ignoring
the lint.

Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: rust-lang/rust-clippy#7344 [1]
Link: rust-lang/rust-clippy#9733 [2]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20230923024707.47610-1-gary@garyguo.net
fbq pushed a commit to Rust-for-Linux/linux that referenced this issue Oct 1, 2023
Since Rust 1.67.0, Clippy's `new_ret_no_self` lint learnt to not
warn about `-> impl Trait<Self>` [1][2].

The kernel is nowadays on Rust 1.71.1, thus remove the `allow`.

Link: rust-lang/rust-clippy#7344 [1]
Link: rust-lang/rust-clippy#9733 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20230923024707.47610-1-gary@garyguo.net
[boqun: Applied Miguel's rewording]
ojeda pushed a commit to Rust-for-Linux/linux that referenced this issue Oct 5, 2023
Clippy triggered a false positive on its `new_ret_no_self` lint
when using the `pin_init!` macro. Since Rust 1.67.0, that does
not happen anymore, since Clippy learnt to not warn about
`-> impl Trait<Self>` [1][2].

The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: rust-lang/rust-clippy#7344 [1]
Link: rust-lang/rust-clippy#9733 [2]
Link: https://lore.kernel.org/r/20230923024707.47610-1-gary@garyguo.net
[ Reworded slightly and added a couple `Link`s. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda pushed a commit to Rust-for-Linux/linux that referenced this issue Oct 5, 2023
Clippy triggered a false positive on its `new_ret_no_self` lint
when using the `pin_init!` macro. Since Rust 1.67.0, that does
not happen anymore, since Clippy learnt to not warn about
`-> impl Trait<Self>` [1][2].

The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: rust-lang/rust-clippy#7344 [1]
Link: rust-lang/rust-clippy#9733 [2]
Link: https://lore.kernel.org/r/20230923024707.47610-1-gary@garyguo.net
[ Reworded slightly and added a couple `Link`s. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
hubot pushed a commit to aosp-mirror/kernel_common that referenced this issue Feb 8, 2024
Clippy triggered a false positive on its `new_ret_no_self` lint
when using the `pin_init!` macro. Since Rust 1.67.0, that does
not happen anymore, since Clippy learnt to not warn about
`-> impl Trait<Self>` [1][2].

The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: rust-lang/rust-clippy#7344 [1]
Link: rust-lang/rust-clippy#9733 [2]
Link: https://lore.kernel.org/r/20230923024707.47610-1-gary@garyguo.net
[ Reworded slightly and added a couple `Link`s. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
[ Upstream commit b2516f7 ]
Change-Id: I94d65058fd3ed92d9a5582e7163cfc627afe5ed3
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
ojeda added a commit to ojeda/linux that referenced this issue Sep 3, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this issue Sep 4, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this issue Oct 3, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to Rust-for-Linux/linux that referenced this issue Oct 7, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alistair23 pushed a commit to alistair23/linux that referenced this issue Nov 11, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alistair23 pushed a commit to alistair23/linux that referenced this issue Nov 12, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Nov 21, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Nov 22, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
WhatAmISupposedToPutHere pushed a commit to WhatAmISupposedToPutHere/linux that referenced this issue Nov 23, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Nov 23, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Dec 5, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Dec 6, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
jannau pushed a commit to AsahiLinux/linux that referenced this issue Dec 7, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Dec 21, 2024
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
chadmed pushed a commit to chadmed/linux that referenced this issue Jan 5, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Jan 29, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Jan 29, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Feb 3, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alyssarosenzweig pushed a commit to alyssarosenzweig/linux that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this issue Feb 17, 2025
Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this issue Mar 7, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this issue Mar 7, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
github-actions bot pushed a commit to anon503/linux that referenced this issue Mar 10, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
github-actions bot pushed a commit to anon503/linux that referenced this issue Mar 10, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
github-actions bot pushed a commit to anon503/linux that referenced this issue Mar 10, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gregkh pushed a commit to gregkh/linux that referenced this issue Mar 13, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
oraclelinuxkernel pushed a commit to oracle/linux-uek that referenced this issue Apr 14, 2025
commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit a3d5dcc9ec48e63c0759879178d27b7a5837e176)
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
tuxedo-bot pushed a commit to tuxedocomputers/linux that referenced this issue May 27, 2025
BugLink: https://bugs.launchpad.net/bugs/2107437

commit 024f967 upstream.

Perform the same clean commit b2516f7 ("rust: kernel: remove
`#[allow(clippy::new_ret_no_self)]`") did for a case that appeared in
workqueue in parallel in commit 7324b88 ("rust: workqueue: add
helper for defining work_struct fields"):

    Clippy triggered a false positive on its `new_ret_no_self` lint
    when using the `pin_init!` macro. Since Rust 1.67.0, that does
    not happen anymore, since Clippy learnt to not warn about
    `-> impl Trait<Self>` [1][2].

    The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.

    Link: rust-lang/rust-clippy#7344 [1]
    Link: rust-lang/rust-clippy#9733 [2]

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Noah Wager <noah.wager@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
# for free to join this conversation on GitHub. Already have an account? # to comment
Labels
C-bug Category: Clippy is not doing the correct thing I-false-positive Issue: The lint was triggered on code it shouldn't have
Projects
None yet
Development

Successfully merging a pull request may close this issue.

1 participant