FlightRadar24-TTGO

Real-time flights display. No login or account required. Easy configuration through the web interface.

Display flights in your area and display them on the screen of the ESP32 TTGO-Display or LilyGo-T-Display-S3 module. Under the hood it uses the API of FlightRadar24.com but only for flight updates. Internally there is a database with airport, aircraft and airline data with graphics to minimize the requests.

This application retrieves the current flights near a configured location and displays them sequentially on the display.

Example of layout on LilyGo-T-Display-S3

History

Oct 21 2023	Added configuration from LilyGo-T-Display-S3 with help from ulihuber
Oct 25 2022	Use LVGL for graphics
Oct 15 2022	Filtering for airborne/grounded/gliders/vehicles
Oct 14 2022	Added vertical speed
Oct 2 2022	Bootstrap for HTML overview
Jun 16 2022	Wifi manager for configuration
Jun 15 2022	Use time zones
Apr 27 2022	Import aircraft types
Dec 5 2021	Compressing of RGB565
Nov 21 2021	Import airlines from Wiki page
Nov 8 2021	New airline logos
Oct 31 2021	Added heading, altitude and speed
Oct 6 2021	Move images from SPIFF to code
May 25 2021	GUI update
Dec 26 2019	Initial version: The "birth" of the project

Features

The FlightRadar firmware offers the following features:

• Lookup of airplane type and specifics (manufacturer, type, description, engine type and count)
• Lookup of carrier and (if available) display the logo
• Display GPS location, registration, altitude, heading, speed and vertical speed of the airplane
• Lookup of the full name for the from- and to airports name and region, lat/lon
• Lookup and display flag for the countries
• No account required, ony WiFi with internet connection!
• Minimal interaction with FlightRadar24; database and graphics are present in firmware
• Configuration using a Web interface
• HTML status screen
• Stay in AP mode at reset (Resetting + pressing top button)
• Clock mode

Usage

Download the repo, open it in PlatformIO and flash it to the ESP32-TTGO-Display. When installed make a WiFi connection to the device, initially called FlightRadar and configure the access point parameters. After configuration the device starts updating the flights in the configured area.

When pressing the top button, the device switches to clock mode: just showing the date and time. To return to the flights mode, press the top button again.

Installing and running PlatformIO

Take the following steps to install platformIo. There is a lot of information on their site!

• Install Visual Studio Code
• From the Extensions menu select PlatformIo
• Clone this repository, and open the folder in your workspace
• Compile and upload to the ESP32-TTGO-Display / LilyGo-T-Display-S3

Status overview

When connected to the FlightRadar, the main screen is shown; the overview. Here details about the device, network and settings are shown.

Modifying the configuration

The configuration can be changed using a web browser. Connecting to the flight radar can be done in two ways:

• During startup, connect to the access point FlightRadar and log in. In case the browser does not open the page immediately, the url is http://192.168.4.1.
• Find the internal IP address of the FlightRadar (from your home router) and enter the url.
• When the password is lost, a fix is to completely erase the ESP32 using the pio run -t erase command. This will reset the device including configuration. If using the esptool, you can do this using esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash. However, after erasing, reflashing of the firmware is required.

Configuration options:

• The WIFI SSID and WIFI password for changing the configuration,
• The SSID and password for the network to connect to with internet access,
• The latitude and longitude (decimal format) to observe,
• The range in degrees of the area to observe,
• Filtering on:
  • Include airborne
  • Include grounded
  • Include gliders
  • Include vehicles on the ground
• The timezone,
• Usage of metric or imperial units

Some tips:

• Sometimes after configuration a reboot is required. If the error screen is shown that it is unable to make a connection, first try to reboot the device,
• When booting, the device waits 30 seconds for a connection. Make a connection to the SSID indicated on the screen using the AP password,
• When connected, go to the ip of the device and, when prompted for the credentials, enter 'admin' and the AP password. This field is required before saving the credentials,
• When the password is lost, holding the top button while booting will clear the configuration.
• When finished disconnect from the wireless network. This should reset the flight radar. Resetting is also a good alternative...

Case / Enclosure

Please take a look at the STL file to create a case for the FlightRadar to host the TTGO-Display and a battery. Thanks to Erwin Reid for creating the models.

Files can be found at Thingverse.

Another option is from LilyGo (AliExpress). With a little modification, the "LILYGO® T-Display Shell ABS Accessories For T-Display T-PicoC3 T-Display RP2040" can be adapted by removing the stands in the case.

These can be ordered at https://www.aliexpress.com/item/1005004507656890.html

Suggestions

Suggestions especially to faulty or missing logo's, airlines etc are welcome. Please make a Pull request and, after verification, this will be added to the main version.

Credits

Thanks to FlightRadar24.com to be able to hook into their API.