de2_i2c_controller.v.bak

// --------------------------------------------------------------------
// Copyright (c) 2005 by Terasic Technologies Inc. 
// --------------------------------------------------------------------
//
// Permission:
//
//   Terasic grants permission to use and modify this code for use
//   in synthesis for all Terasic Development Boards and Altrea Development 
//   Kits made by Terasic.  Other use of this code, including the selling,
//   duplication, or modification of any portion is strictly prohibited.
//
// Disclaimer:
//
//   This VHDL or Verilog source code is intended as a design reference
//   which illustrates how these types of functions can be implemented.
//   It is the user's responsibility to verify their design for
//   consistency and functionality through the use of formal
//   verification methods.  Terasic provides no warranty regarding the use 
//   or functionality of this code.
//
// --------------------------------------------------------------------
//           
//                     Terasic Technologies Inc
//                     356 Fu-Shin E. Rd Sec. 1. JhuBei City,
//                     HsinChu County, Taiwan
//                     302
//
//                     web: http://www.terasic.com/
//                     email: support@terasic.com
//
// --------------------------------------------------------------------
//
// Major Functions:i2c controller
//
// --------------------------------------------------------------------
//
// Revision History :
// --------------------------------------------------------------------
//   Ver  :| Author            :| Mod. Date :| Changes Made:
//   V1.0 :| Joe Yang          :| 05/07/10  :|      Initial Revision
// --------------------------------------------------------------------
module de2_i2c_controller (
  CLOCK,
  I2C_SCLK, // I2C CLOCK
  I2C_SDAT, // I2C DATA
  I2C_DATA, // DATA:[SLAVE_ADDR,SUB_ADDR,DATA]
  GO,       // GO transfor
  END,      // END transfor 
  W_R,      // W_R
  ACK,      // ACK
  RESET,
  // TEST
  SD_COUNTER,
  SDO
);

input  CLOCK;
input  [23:0] I2C_DATA;  
input  GO;
input  RESET;   
input  W_R;
inout  I2C_SDAT;        
output I2C_SCLK;
output END;     
output ACK;

// TEST
output [5:0] SD_COUNTER;
output SDO;

reg SDO;
reg SCLK;
reg END;
reg [23:0] SD;
reg [5:0] SD_COUNTER;

wire I2C_SCLK = SCLK | (((SD_COUNTER >= 4) & (SD_COUNTER <= 30))? ~CLOCK : 0);
wire I2C_SDAT = SDO ? 1'bz : 0;

reg ACK1, ACK2, ACK3;
wire ACK = ACK1 | ACK2 | ACK3;

//--I2C COUNTER

always @(negedge RESET or posedge CLOCK)
begin
  if (!RESET)
    SD_COUNTER = 6'b111111;
  else
    begin
      if (GO == 0) 
        SD_COUNTER = 0;
      else 
        if (SD_COUNTER < 6'b111111)
          SD_COUNTER = SD_COUNTER + 1;    
    end
end

always @(negedge RESET or posedge CLOCK )
begin
  if (!RESET)
    begin
      SCLK = 1;
      SDO = 1;
      ACK1 = 0;
      ACK2 = 0;
      ACK3 = 0;
      END = 1;
    end
else
  case (SD_COUNTER)
  6'd0  : begin ACK1 = 0; ACK2 = 0; ACK3 = 0; END = 0; SDO = 1; SCLK = 1; end

  // Start
  6'd1  : begin SD = I2C_DATA; SDO = 0; end
  6'd2  : SCLK = 0;

  // Slave Address
  6'd3  : SDO = SD[23];
  6'd4  : SDO = SD[22];
  6'd5  : SDO = SD[21];
  6'd6  : SDO = SD[20];
  6'd7  : SDO = SD[19];
  6'd8  : SDO = SD[18];
  6'd9  : SDO = SD[17];
  6'd10 : SDO = SD[16];     
  6'd11 : SDO = 1'b1;   //ACK

  // Sub-address
  6'd12  : begin SDO = SD[15]; ACK1 = I2C_SDAT; end
  6'd13  : SDO = SD[14];
  6'd14  : SDO = SD[13];
  6'd15  : SDO = SD[12];
  6'd16  : SDO = SD[11];
  6'd17  : SDO = SD[10];
  6'd18  : SDO = SD[9];
  6'd19  : SDO = SD[8];
  6'd20  : SDO = 1'b1; // ACK

  // Data
  6'd21  : begin SDO = SD[7]; ACK2 = I2C_SDAT; end
  6'd22  : SDO = SD[6];
  6'd23  : SDO = SD[5];
  6'd24  : SDO = SD[4];
  6'd25  : SDO = SD[3];
  6'd26  : SDO = SD[2];
  6'd27  : SDO = SD[1];
  6'd28  : SDO = SD[0];
  6'd29  : SDO = 1'b1;  // ACK
        
  // Stop
  6'd30 : begin SDO = 1'b0; SCLK = 1'b0; ACK3 = I2C_SDAT; end
  6'd31 : SCLK = 1'b1; 
  6'd32 : begin SDO = 1'b1; END = 1; end
  endcase
end

endmodule