radio_tool

Radio Firmware tool

Radio Support

Manufacturer	Radio Model	Fw Read	Fw Write	Fw Wrap	Db Read	Db Write
TYT	MD-2017	✖️	✔️	✔️	✖️	✖️
TYT	MD-9600	✖️	✔️	✔️	✖️	✖️
TYT	MD-UV380	✖️	✔️	✔️	✖️	✖️
TYT	MD-UV390	✖️	✔️	✔️	✖️	✖️
TYT	MD-390	✖️	✔️	✔️	✖️	✖️
TYT	MD-380	✖️	✔️	✔️	✖️	✖️
TYT	MD-446	✖️	✔️	✔️	✖️	✖️
TYT	MD-280	✖️	✔️	✔️	✖️	✖️
Baofeng	DM-1701	✖️	✔️	✔️	✖️	✖️
Baofeng	DM-1801	✖️	✔️	✔️	✖️	✖️
Baofeng	RD-5R	✖️	✔️	✔️	✖️	✖️
Connect Systems	CS800D	✖️	✖️	✔️	✖️	✖️
Ailunce	HD1	✖️	✔️	✔️	✖️	✖️
Yaesu	FT-70DR	✖️	✔️	✖️	✖️	✖️
Radioddity	GD-77	✖️	✔️	✔️	✖️	✖️

Fw = Firmware
Db = Codeplug database

Download

Windows: AppVeyor

Linux: Github Actions

Otherwise you can use the instructions below to build

Building

Dependencies Linux (Ubuntu/Debian):

sudo apt install libusb-1.0-0-dev cmake gcc g++ pkg-config

Dependencies Mac:

brew install libusb cmake pkg-config

Build:

git clone https://github.com/v0l/radio_tool
cd radio_tool
mkdir build && cd build
cmake ..
make -j4
./radio_tool --help

Docs

Code documentation: https://data.v0l.io/radio_tool/docs

Usage

Usage:
  ./radio_tool [OPTION...]

 General options:
  -h, --help <command>  Show this message
  -l, --list            List devices
  -d, --device <index>  Device to use
  -i, --in <file>       Input file
  -o, --out <file>      Output file
  -L, --list-radios     List supported radios

 Programming options:
  -f, --flash    Flash firmware
  -p, --program  Upload codeplug

 Firmware options:
      --fw-info  Print info about a firmware file
      --wrap     Wrap a firmware bin (use --help wrap, for more info)
      --unwrap   Unwrap a fimrware file

 All radio options:
      --info                 Print some info about the radio
      --write-custom <data>  Send custom command to radio
      --get-status           Print the current DFU Status

 TYT Radio options:
      --get-time             Gets the radio time
      --set-time             Sets the radio time
      --dump-reg <register>  Dump a register from the radio
      --reboot               Reboot the radio
      --dump-bootloader      Dump bootloader (Mac only)

 Codeplug options:
      --codeplug-info  Print info about a codeplug file

Flash Firmware

./radio_tool -d 0 -f -i new_firmware.bin

Wrap Firmware

./radio_tool --wrap -o wrapped.bin -r DM1701 -s 0x0800C000:main.bin

Unwrap Firmware

Output file in this case is a file prefix, the filename will be unwrapped_0x0800C000 and others if you have firmware will more than one segment

./radio_tool --unwrap -i wrapped.bin -o unwrapped