Broadlink Air Conditioners to mqtt .... very much still in dev(getting better)

Dunham bush aircons and might work Rinnai. Broadlink devtype == 0x4E2a (20010)

uses Pahoo MQTT so run :

pip install paho-mqtt

1. copy sample_config.ym_ to config.yml
2. Edit config to match your enviroment
3. run ./monitor.py

If you lazy and just want to copy and paste your devices, use the -S option and discovered devicesconfig will be printed to screen for copy/paste Example:

root@berry1:~/ac_db# ./monitor.py -S
*********** start copy below ************
devices:
- ip: 10.0.0.227
  mac: b4430da741af
  name: Office
  port: 80

*********** stop copy above ************

command line arguments:

optional arguments:
  -h, --help            show this help message and exit
  -d, --debug           set logging level to debug
  -s, --discover        Discover devices
  -S, --discoverdump    Discover devices and dump config
  -Hd, --dumphaconfig   Dump the devices as a HA manual config entry
  -b, --background      Run in background
  -ms MQTTSERVER, --mqttserver MQTTSERVER
                        Mqtt Server, Default:
  -mp MQTTPORT, --mqttport MQTTPORT
                        Mqtt Port
  -mU MQTTUSER, --mqttuser MQTTUSER
                        Mqtt User
  -mP MQTTPASSWORD, --mqttpassword MQTTPASSWORD
                        Mqtt Password
  -Ma MQTT_AUTO_DISCOVERY_TOPIC, --mqtt_auto_discovery_topic MQTT_AUTO_DISCOVERY_TOPIC
                        If specified, will Send the MQTT autodiscovery config
                        for all devices to topic
  


example: Run in background
./monitor.py -b
run with full debugging (logs to ac_to_mqtt.log in folder where monitor.py is located)
./monitor.py -d

Dump all discovered devices so one can copy paste
./monitor.py -S

to set values just publish to /aircon/mac_address/option/value/set new_value :

/aircon/b4430dce73f1/temp/set 20

Home Assistant (www.home-assistant.io) Options

Now MQTT autodiscovery workes for HomeAsssitant (https://www.home-assistant.io/docs/mqtt/discovery/)

Enabling MQTT autodisocvery:

1. Edit config.yml and add below if not there. If already there, then make sure prefix matches configuration.yml file settings (in HA)

mqtt:
  discovery: true
  discovery_prefix: homeassistant
  

To add a device manually useing the configuration.yml in HA you can create a easy config to copy/paste by using -Hd (--dumphaconfig) . Just make sure your config.yml is updated with correct settings before running.

This is also nice to verify the autoconfig is correct that gets sent to HA using mqtt autoconfig

Example:

root@berry1:~/ac_db# ./monitor.py -Hd
 
*********** start copy below ****************
climate:
- action_topic: /aircon/b4430dce73f1/homeassistant/set
  current_temperature_topic: /aircon/b4430dce73f1/ambient_temp/value
  fan_mode_command_topic: /aircon/b4430dce73f1/fanspeed_homeassistant/set
  fan_mode_state_topic: /aircon/b4430dce73f1/fanspeed_homeassistant/value
  fan_modes:
  - Auto
  - Low
  - Medium
  - High
  max_temp: 32.0
  min_temp: 16.0
  mode_command_topic: /aircon/b4430dce73f1/mode_homeassistant/set
  mode_state_topic: /aircon/b4430dce73f1/mode_homeassistant/value
  modes:
  - 'off'
  - cool
  - heat
  - fan_only
  - dry
  name: Living Room
  platform: mqtt
  precision: 0.5
  temperature_command_topic: /aircon/b4430dce73f1/temp/set
  temperature_state_topic: /aircon/b4430dce73f1/temp/value