This repository has been archived by the owner on May 10, 2024. It is now read-only.
Delay on outgoing packets send while high load on Zigbee network #5
Labels
bug
Something isn't working
Comments
xyzroe
changed the title
|
@Hashira-ira please check this one tag/0.6.1 |
|
I have 3 devices on my test network On version 0.6.0, the commands were executed with a delay starting from 10 seconds and up to several minutes even, or might not be executed at all. On version 0.6.1, commands are executed almost instantly. |
xyzroe
added a commit
that referenced
this issue
Oct 31, 2021
- Set MQTT reconnect interval same as MQTT update interval to avoid web server freezing,
while broker is unavailable.
- Added web authentication. Issue #4
Set to OFF by default, enable on general settings page.
- Blocking saving an empty hostname, login and password to the web interface.
Replaced with standard values ( ZigStarGM / admin / admin )
0.6.1
- Fixed delay on high load Zigbee networks. Issue #5
# for free
to subscribe to this conversation on GitHub.
Already have an account?
#.
While the network coordinator is loaded with constant incoming traffic (at least 1 message every second) outgoing requests from z2m are sent with a delay.
There is no delay in receiving incoming packages in any conditions.
FW version: 0.6.0
Если сетевой координатор будет загружен постоянно входящим трафиком каждую секунду и в этом момент делать запросы на исходящие действия то действия выполняются с таймингом задержкой. FW version : 0.6.0
The text was updated successfully, but these errors were encountered: