New DCS monitor

A new DCS monitor is now active to watch with timelines the details of the behaviour of most of the detectors in PADME.

The page actually is hosted on http://l0padme1:18888/#menu_experiments_submenu_padme_hv;theme=slate.

The old DCS main page http://l0padme3:90090/dcs is still active and displays the relevant beam and DAQ info in realtime, and may show you the ECAL and SAC temperatures, Beam info and Mimosa timeplots (and some other less frequently used plots and infos).

I advise to open for each shift to control ALL informations :

1. the experiment monitor page http://l0padme3:90090/monitor
2. the OLD DCS monitor page http://l0padme3:90090/dcs
3. the new DCS monitor page http://l0padme1:18888/#menu_experiments_submenu_padme_hv;theme=slate.

The new DCS control page (Damage Control System) is instead hosted at https://l0padme1:8888/. For operating instructions look also at the "Reset NIM crates" instructions.

---

Once you are in the new DCS monitor page on its right panel you will see a menu experiments and, below it, a list of monitored items : click on each voice shown and you will be brought at the beginning of the monitored quantities.

Following each header you will see a lot of timeline plots with ALL the relevant and monitored informations which are transferred also to the PadmeDCS database continuously.

You can check there for all the hardware parts monitored ALl relevant informations : just be patientand scroll until you have arrived at the information you need (voltage output, currents, temperatures ....).

... page still in preparation